6J1P-EV
High-frequency pentode with increased durability, reliability and mechanical strength.
Designed for broadband amplification of high frequency voltage.
Durability not less than 5000 hours.
Weight no more than 15 g
Technical characteristics and electrical parameters of the 6J1P-EV lamp:
Filament voltage 6.3 ± 0.6 V
Filament current 170 ± 15 mA
Nominal anode voltage (constant) 120 V
Anode voltage limit (constant) 200 V
Anode current 7.35 ± 2.35 mA
Cathode current limit 20 mA
The reverse current of the first grid is not more than 0.1 μA
Grid voltage second rated (constant) 120 V
Grid voltage second limit (constant) 150 V
Power dissipated by the anode, limit 1.8 W
The power dissipated by the second grid, limiting 0.55 W
Voltage between cathode and heater limit (constant) 120 V
Slope 5.15 ± 1.25 mA / V
Cut-off voltage of the anode current (at anode current no more than 5 μA) no more than -15 V
Cutoff voltage of the electronic current of the first grid -1.5 V
Internal resistance 0.1-1.1 MΩ
Equivalent resistance of intra-lamp noise no more than 3.7 kOhm
Input impedance at 60 MHz 12-25 kOhm
Resistance in the cathode circuit for automatic bias 200 Ohm
Resistance in the grid circuit of the first limiting 1 MΩ
Input capacitance 3.5-4.7 pF
Output capacitance 1.9-2.8 pF
Passage capacity no more than 0.035 pF
Capacitance cathode-heater no more than 4.6 pF
Glass miniature decoration