Car HUD OBD2 Gauge Head Up Car Digital Display Speedometer RPM Alarm Water Temp
Car HUD OBD2 Gauge Head Up Car Digital Display Speedometer RPM Alarm Water Temp
Main Functions:
- Display Information:vehicle speed, engine RPM, water temperature, voltage, instantaneous fuel consumption, average fuel consumption, single driving distance,total driving distance, driving time,turbo pressure, Air/Fuel Ratio, oil temperature
- Alarm: low voltage alarm,high water temperature alarm,over speed alarm, engine fault code alarm, eliminate the fault code,freely switch between kilometers&miles ( km/h & MPH), Celsius and
- Fahrenheit (°C & ℉ ) switch freely...
- Add new functions: accelerating competitive mode ,Brake performance test, can read the entire car data stream information
- Wide Compatibility: available for cars with OBD2 and EUOBD port, plug and play;
Attention:
- The OBD2 mode are not compatible with following cars:
- European and American cars manufactured before 2008 and Asian cars manufactured before 2008.
- American cars produced before 2008 and all Dodge, JEEP, Sail, Chrysler cars.
- France cars manufactured by FAT,DS,PEUGEOT,Citroen,Renault,Simka, Amirka
- Japanese cars: Suzuki, Mazda, Infiniti (QX50, Q50, Q501), Toyota avanza 2013, Lexus (is250, ex250, ES300H), Honda (jazz, CRV) are not compatible. And all Japanese cars before 2008 are not compatiable.
- Some models of Kia and Hyundai cannot use this OBD2 HUD (2013 Hyundai Sonata, 2017 Kia Soul PS, etc.)
- Oil-electric hybrid and some diesel vehicles cannot use OBD2 HUD, GPS HUD are recommended.
- Pickup Trucks and Modified ECU vehicles are not suitable for this HUD.
- If you are not sure this product is suitable for your car or not, please contact us before ordering, thank you!
Package List:
- 1 * HUD Main Unit
- 1 * OBD2 Cable
- 1 * HUD Holder
- 1 * Velcro sticker
- 1 * User Manual
FAQs (Solution for Common Problems):
- 1.The screen without any display,and no electricity
Start the car engine;check if the OBD cable line is tight;please pull down the OBD cable several times to confirm;check if HUD power switch turns on. If no display still,please test the device on a different car, analyze whether the car OBD diagnostic interface is good, if it is not good,please repair it and try again. - 2.When HUD power on, HUD only shows the car voltage and be automatic power off after 30 seconds driving.
HUD is only suitable for cars with OBD2 agreement and EU-OBD agreement（European region: after 03 years, Other region:after 07 years）
HUD Products donnot support JOBD and OBDI and recommended test for another car. - 3.See not clearly when HUD under the sunlight,and with double reflection.
Check whether the HUD host surface protective film is torn,and please stick the reflection film on the windscreen.And vertical press in the setting button for 5 seconds to enter into menu setting when HUD is power on,short press 2 times to menu 2,adjust the parameter to 5,vertical press in 5 seconds to save. - 4.Inaccurate Speed
a.First check the speed unit is correct or not, the speed unit can switch into KM/H and MPH, short press in the wave button to switch between KM/H and MPH
b.When HUD is power on,vertical press the setting button for 5 seconds to enter into the menu options, find menu 1,the parameter shows 107,up or down the setting button to increase or decrease the value according to the difference until it shows correct one.After adjustment, vertical press in 5 seconds to save it. - 5.Wrong operation lead to crashes. Or inaccurate datas
Do a reset setting.
