This adapter card can use M.2 NGFF SSD solid state drive to replace Western Digital's 5mm thick hard drive WD5000MPCK WD5000M22K WD5000M21K. It adopts dual-channel voltage stabilization design, supports various high-power mSATA solid state drives, and works stably and reliably.
Shipped after 100% testing! Pay attention to reading the product introduction and precautions! Be careful!
Please don’t ask about the speed of the adapter card. This adapter card only changes the interface shape, that is, connect the signal line from your original hard disk interface to another interface shape. This conversion does not need to go through the integrated circuit chip, since Without the integrated circuit chip, it has no effect on the speed and performance of your hard disk, and does not need any driver (the operating system loads the driver of your hard disk, and the adapter card does not drive, because there is no chip). The overall speed depends on how fast your hard drive is, and how fast your computer can support (many computers upgrade BIOS can increase a lot of speed), hereby declare!

Things to know before buying:
1. Depending on the batch, the color of the socket at the interface and the color of the PCB circuit board (the circuit board is available in black and green, shipped randomly), etc. may change, which will not affect the use and will not be notified. Everything is subject to the actual product !
2. This adapter card is an interface-to-interface conversion, without any chip, does not affect any performance of the hard disk, and is tested and shipped.
3. This adapter card has no chip and no warranty issues.
4. This adapter card only supports SATA protocol M.2 NGFF SSD solid state drives, and cannot support PCIe x2 and PCIe x4 protocol M.2 NGFF SSD. Be sure to distinguish clearly! Using the wrong hard disk may cause damage to the device!

Products include: 1* adapter card