CF-601M NCF (R) male side 1 piece
*Two products are shown in the image, but they are sold in units of one.
accessories
・2mm hexagon driver (H2.0)
・1.27mm* 50L hex driver (H1.27)
Features
The conductor part is α (alpha)-conductor made of pure copper material, and heat-resistant NCF liquid crystal polymer resin is injected into the one-piece structure conductor pin of non-magnetic rhodium plating.
The body uses a special "NCF" anti-resonance damping material (nylon/glass fiber blended with nano-sized crystalline ceramic powder and carbon powder) combined with heat-resistant NCF liquid crystal polymer resin. NCF improves the depth and focus of the soundstage, overtones and tonal balance. Low frequencies are cleaner, and lowering the noise floor allows for a more crisp feel.
Housing: The multi-material hybrid NCF carbon housing consists of a hard clear coat on the outside and another layer of hybrid NCF silver-plated 3k carbon fiber underneath. The interior is a non-magnetic stainless steel housing. The best damping and insulation materials improve frequency extension and sound balance.
Connection by screwing or soldering
Spec.
Applicable maximum cable diameter: 10.0mm
Applicable conductor wire size---Twisted wire: 14AWG (2.08 sq.mm) MAX / Single core: 12AWG (3.3 sq.mm) MAX / Wire diameter: 2.1mm MAX
External dimensions : ø18.6mm X 64.6mm overall length approx.
Weight (net): 46.9g approx.
please note:
"If the torque is too large, the screw may be damaged. The recommended optimum tightening torques are:
Conductor wire set screw: 25cN m (2.55kgf-cm)
Housing fixing screw: 30cN m (3.06kgf-cm)
To avoid damage to the insulation, be sure to observe the following soldering temperature and time.
Recommended soldering conditions: Temperature: Maximum about 425°C Time: Maximum about 15 seconds