CF-602F NCF (R) female side 1

*Two products are shown in the image, but they are sold in units of one.

accessories

・2mm hexagon driver (H2.0)

・1.27mm* 50L hex driver (H1.27)

Features

The conductor part is an α (alpha)-conductor made of pure copper material, and a non-magnetic rhodium-plated one-piece structure conductor pin.

The body is made of a special "NCF" anti-resonance damping material (nylon/glass fiber mixed with nano-sized crystalline ceramic powder and carbon powder) combined with heat-resistant NCF liquid crystal polymer resin and NCF damping elastic reeds. 　NCF improves the depth and focus of the soundstage, overtones and tonal balance. Low frequencies are cleaner, and lowering the noise floor allows for a more crisp feel.

Using stainless steel powder as a basic material, multiple special damping metal powders are blended. Powder metallurgy molded fixed button.

Chrome plated brass stamping housing.

NCF material damping elastic lead.

Housing: The multi-material hybrid NCF carbon housing consists of a hard clear coat on the outside and another layer of hybrid NCF silver-plated 3k carbon fiber underneath. The interior is a non-magnetic stainless steel housing. The best damping and insulation materials improve frequency extension and sound balance.

Connection by screwing or soldering

Spec.

Applicable maximum cable diameter: 10.0mm

Applicable conductor wire size---Twisted wire: 13AWG (2.62 sq.mm) MAX / Single core: 12AWG (3.3 sq.mm) MAX / Wire diameter: 2.4mm MAX

External dimensions : ø18.6mm X 70.85mm overall length approx.

Weight (net): 58.2g approx.

please note:

"If the torque is too large, the screw may be damaged. The recommended optimum tightening torques are:

Conductor wire set screw: 25cN m (2.55kgf-cm)

Housing fixing screw: 30cN m (3.06kgf-cm)

To avoid damage to the insulation, be sure to observe the following soldering temperature and time.

Recommended soldering conditions: Temperature: Maximum about 425°C Time: Maximum about 15 seconds