• 1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
    • 2. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.

    • Specifications:
    • Output
    • 1.DC Voltage:12.15V
    • 2.Rated Current(220V input):133A
    • 3.Rated Current(110V input):100A
    • 4.Rated Power(220V input):1600W
    • 5.Rated Power(110V input):1200W
    • 4.Ripple & Noise:<1%
    • 5.Voltage Regulation:<2%
    • 6.Source Regulation:<1%
    • 7.Load Regulation:<1%
    • 8.Setup, Rise Time:<2s
    • 9.Power off Protection Trip Time:>9mS
    • 10.Interface Type:5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
    • 11.Noise Level:<43db

    • Input:
    • 1.Voltage Range:100-240V AC
    • 2.Starting Voltage:95-105V AC
    • 3.Frequency Range:47-63Hz
    • 4.Power Factor:>0.95 (full load)
    • 5.Leakage Current:<1.5mA (220V 50Hz)

    • Protection
    • 1.Low-voltage Input:80-89V AC
    • 2.Output Short Circuit:Yes
    • 3.Output Overcurrent:134-185A max.
    • 4.Overheat Protection:Yes

    • Environment Conditions
    • 1.Operating Temperature:-20°C - 50°C
    • 2.Operating Humidity:20% - 90% relative humidity (non-condensing)

    • Fan:Forced-air cooling
    • Size:220mm*108mm*62mm
    •  
    • Package Included:
    • 1 x power supply for Antminer S9 for L3
    Note: The power cord is not included, please find one with at least 10A from your local market.