Product Features and Function Description

1. First, drill holes on the wall of the TV, and then drill holes on the back and bottom of the wall near the socket. Through the installation of the cable manager, a beautiful power cord and HDMI cable channel are formed, achieving the goal of hiding scattered cables and keeping the wall clean and tidy

2. It should be noted that the applicable background walls are gypsum walls, wooden board walls, and other walls that can be punched with a hole punch, not suitable for ceramic tiles, brick walls, etc

3. Suitable for wall specifications within a thickness of 12mm to 18mm, with automatic adjustment and locking when tightening screws for installation

4. Two supports are installed as a set, respectively on the upper and lower holes, namely the inlet and outlet holes, to cover and aesthetically treat the holes

5. The panel material of the product is soft adhesive, and after the wire passes through, it will be elastically closed to prevent mice from entering the wall partition layer

6. The product packaging is equipped with a punch, and consumers need to use it in conjunction with their own electric tools

Installation method and instructions

1. Assemble and fix the hole opener, and then install the hole opener on the electric drill

(Note: The hole opener is suitable for drilling on wooden walls and gypsum board walls)

2. Opening holes next to the TV and socket

3. Remove the TV cable manager bracket

4. Place the bracket into the hole and tighten the screws to secure it

5. Install the combination according to the positioning groove, and then buckle the four corners together

6. Two brackets can penetrate each other and hide the cables behind the wall

texture of material

ABS+TPU

Packaging includes and specifications

Cable manager bracket * 2

Opener Ø 76 * 1

Hexagonal wrench 2.5MM * L50MM * 1

Instructions * 1