Input Impedance: 500KΩ
Output Impedance: 10KΩ
Running Current: 14mA
Power: 6F22 9V Battery/ DC 9V adapter

Model: JF-07

Introduction
JF-07 Classic Flanger effect pedal is an affordable but highly effective pedal, and as such it allows any guitar player, beginner intermediate or expert, to dive in (deep) and begin experimenting with the headspace that is Sound.
But more importantly for you is the same guitar solo played through a JOYO Flanger! This "Classic Flanger" pedal brings to mind the 70's rock era, with originality shining.


Specifications
Input Impedance: 500KΩ
Output Impedance: 10KΩ
Delay Time: 0.9ms-6 .4ms
Speed Range: 0. 4HZ-8Hz
Running Current: 20mA
Power: 6F22 9V Battery/ DC 9V adapter

Model: JF-13

Introduction
JF-13 AC Tone guitar effect pedal based on the AC-30 tube amplifier that with a little help from two mop-top multi-instrumentalists, revolutionized the electric guitar sound, JOYO AC Tone pedal really rocks our age.

The JOYO AC Tone pedal really captures something usually missing from most modern guitar sounds: subtle to aggressive warmth and a natural sounding overdrive. with the unique "Voice" control you can dial in never before heard tones.

Perhaps the greatest feature of this pedal is the fact that it has inbuilt cabinet emulation meaning you can go from the pedal directly to a mixing desk, a DAW or directly to your computer/laptop with a jack to USB lead. So this pedal is essentially a DI. You can use it instead of an amp and it can save your gig if your amp fails, just put it at the end of all your other pedals and set it clean like your amp then just take the output from the American sound straight to the desk. Or by going direct into a DAW or even your laptop you can record direct from the pedal.


Specifications
Input Impedance: 1MΩ
Output Impedance: 1KΩ
Running Current: 6mA
Power: 6F22 9V Battery/ DC 9V adapter

Model: JF-14

Introduction
JOYO American Sound pedal is designed to introduce the right kind of overdrive, reproduces the sound of Fd 57 Deluxe amp, performs great sound from clean to driven and everywhere in between which can simulate lots of amplifiers.

Some describe the tone of the amp as dark, as there is less high end, but it features a full 3-band EQ in case that's really not what you're looking for. This pedal will also do the classic sounds of the early Fenders Amps cranked right up, that brilliant growling, saturated overdriven tweed sound. This sound can be heard on countless recordings, from Eric'C through to Billy'G.

Perhaps the greatest feature of this pedal is the fact that it has inbuilt cabinet emulation meaning you can go from the pedal directly to a mixing desk, a DAW or directly to your computer/laptop with a jack to USB lead. So this pedal is essentially a DI.


Specifications
Input Impedance: 1MΩ
Output Impedance: 1KΩ
Running Current: 6mA
Power: 6F22 9V Battery/ DC 9V adapter

Model: JF-15

Introduction
JF-15 California Sound is an overdrive/boost pedal that has been likened to the rich and warm overdrive tones. Simulates the sound of the Boogie MK-II amplifier and get lots of natural and focused rock tones, one of the most revered tube amps ever made.

The California sound will work its way into your pedal chain, the features on this distortion pedal really provide flexibility and various sounds. You can dial in high gain scooped mid rhythm tones in seconds. Or full out searing lead tones with the twist of a few knobs. it is capable of a massive amount of tones, from low gain overdrive to thick, full, distortion.


Specifications
Input Impedance: 1MΩ
Output Impedance: 1KΩ
Running Current: 6mA
Power: 6F22 9V Battery/ DC 9V adapter

Model: JF-17

Introduction
Adjust for shaping frequency response: "High", "Mid", "Low", "Boost", "Level" and "Drive" 6 control knobs, independent EQ controls, allowing you to achieve metal, rock and punk sounds. with the combination of its three band EQ and drive and level knobs you can get a wide variety of tones from heavy blues through hard rock to high gain metal.

Specifications
Input Impedance: 1MΩ
Output Impedance: 600Ω
Running Current: 25mA
Power: 6F22 9V Battery/ DC 9V adapter