*SaRaiFo = Save the RainForest.
You will receive this item in the following dimensions per board:
length cm |
width cm |
Strength mm approx. |
1 x 83 |
+/- 21.0-21.5 |
+/- 50-51 |
Density: approx. +/- 850kg/m3
This is our new very sustainable mahogany SaRaiFo* Wood with a very fine and noble striped structure. The starting material is very sustainable poplar veneer that is separated from defects, very highly compressed and then pressed back into a block. The density is about 850Kg/m3!. This SaRaiFowood is pressed/surface glued (E1) from many fine real wood veneer lamellas in several production processes and then sawn into a board or plank.
The board is only in the raw cut, partially still slightly rough sawn, whereby the saw cut is already very fine and no longer quite so coarse/rough (some cross marks are only from sawing and go away after complete sanding/planing, one side was slightly pre-planed. The Strength may +/-0.5mm vary as well as the Broad lies mostly between 21-21.5cm , dry, to approx. +/-13% dried in a drying chamber!
Areas of application: Furniture, worktops, decorative wood, shelves, strips, handles, instrument parts, jewellery, wood turning,... and many more individual areas. See the difference between before and after in the photos. The ends have been protected against cracks with a green wood preservative (see photos), unfortunately there are now and then a few green stains on one side - all of which can be sanded down. For the best possible smooth surface, sanding the wood is recommended anyway! The dimensions are given with minimum and maximum values. You will receive one piece.
We sometimes add a few examples to the photos to show what the wood might look like after machining - this is to inspire you - these photos are for example purposes only and the items are not part of this offer! Please send us your photos too!
*SaRaiFo = Save the RainForest.
You will receive this item in the following dimensions per board:
length cm |
width cm |
Strength mm approx. |
1 x 83 |
+/- 21.0-21.5 |
+/- 50-51 |
Density: approx. +/- 850kg/m3
This is our new very sustainable mahogany SaRaiFo* Wood with a very fine and noble striped structure. The starting material is very sustainable poplar veneer that is separated from defects, very highly compressed and then pressed back into a block. The density is about 850Kg/m3!. This SaRaiFowood is pressed/surface glued (E1) from many fine real wood veneer lamellas in several production processes and then sawn into a board or plank.
The board is only in the raw cut, partially still slightly rough sawn, whereby the saw cut is already very fine and no longer quite so coarse/rough (some cross marks are only from sawing and go away after complete sanding/planing, one side was slightly pre-planed. The Strength may +/-0.5mm vary as well as the Broad lies mostly between 21-21.5cm , dry, to approx. +/-13% dried in a drying chamber!
Areas of application: Furniture, worktops, decorative wood, shelves, strips, handles, instrument parts, jewellery, wood turning,... and many more individual areas. See the difference between before and after in the photos. The ends have been protected against cracks with a green wood preservative (see photos), unfortunately there are now and then a few green stains on one side - all of which can be sanded down. For the best possible smooth surface, sanding the wood is recommended anyway! The dimensions are given with minimum and maximum values. You will receive one piece.
We sometimes add a few examples to the photos to show what the wood might look like after machining - this is to inspire you - these photos are for example purposes only and the items are not part of this offer! Please send us your photos too!