1000W 2000W Spannungswandler 12V auf 230V Wechselrichter LCD Fernbedienung USB

Mit diesem Spannungswandler können Sie normale 220V/230V/240V Elektrogeräte im
Auto/Boot/Wohnwagen oder auch in Ihrem Schrebergarten.
Bitte beachten Sie diese Wechselrichter muss an 12V-Batterie angeschlossen werden.

 

PRECAUTIONS

 

Because of the high temperature and high pressure inside the equipment, please strictly follow this precautions to correctly and safely operate this equipment.

 

 

Technische Daten:

 

Modell No. 1000W-12V
Dauerausgangsleistung 1000W
Max. kurzfristige Spitzenleistung 2000W
Eingangsgleichspannung (DC) 12V
Ausgangswechselspannung (AC) 230V
Frequenz 50Hz
Wirkungsgrad > 90%
Leerlaufstrom 0,5A
Ausgangswellenform Reine Sinusware
Temperatuschutz ≥ 45 ° C(Der Ventilator begann zu arbeiten)
Schutz vor geringer eingangsspannung JA
Verpolungsschutz JA
Schaltungsschutz JA
Schutz vor Kurzschluß JA
Schutz vor Überlast JA
Alarm bei schwacher Batterie (nominal) 9,5 - 11,0V
Abschaltpunkt für schwache Batterie (nominal) 9,0 - 10,5V
Abschaltpunkt für hohe Batterie (nominal) 14,5 - 15,5V
Nettogewicht 1,4KG
Größe 218*105*88 mm

 

 

Safety Precautions: 

  • The connection of storage battery should follow the specifications of this manual. The operator should carefully check the positive and negative poles before the connection and avoid the reversed polarity, otherwise it may damage the equipment.
  • Do not operate this equipment in the conditions of rain, exposure, humidity, heavy dust and strong vibration.
  • The unauthorized person should not open the equipment enclosure. The dangerous high voltage inside the equipment may cause the deadly danger.
  • Do not drill in the enclosure. The unqualified drilling will damage the components inside the equipment. The metal chips as a result of drilling may enter in the equipment and bring along the short circuit.
  • Do not install or dismantle this equipment with electricity. Before the installation and dismantlement of equipment, the power switch should be turned off.
  • Do not allow children to play with the equipment or accessories, otherwise it may cause the dangers such as swallowing.
  • The supply voltage of equipment should meet the input voltage requirement of equipment. Please use the storage battery with the rated voltage, while the storage battery with non-rated voltage may damage the equipment.
  • Please keep from the foreign matters (such as the metal) entering in the equipment through the ventilation hole and the water and other fluids flowing into the equipment.
  • When plugging in or out the wire of equipment, please keep the hands dry. The equipment should be stopped and the power should be turned off.
  • Please install the equipment strictly according to the manufacturer’s requirements. The sufficient space for heat dissipation should be maintained 10cm away from the body and top of equipment. Do not store any combustibles around the equipment. The equipment should be kept away from the electrical appliances with the strong magnetic field and strong electric field, such as the microwave oven, refrigerator and cell phone.
  • In case of any abnormality, such as the unexpected inflow of fluids in the equipment, equipment smoking, abnormal sound and smells, please stop the equipment and turn off the power immediately. Plug out all cables that are connected to the equipment, such as the battery cable and AC output cable. In case of any failure, please contact the specified maintenance center for the repairing and maintenance.
  • Without the authorization, any organization or person should not change the design of structure, safety and performance of equipment.
  • Before the fan stops, do not put the fingers or tools into the running fan, otherwise it may cause the damage to the equipment or injury to human body.

 

 

Installation and Operation procedure

 

Out of box audit

 

Open the package and examine the following items:

Visually examine the appearance of equipment and confirm whether there is any damage during the transportation. In case of any damage, please inform the carrier immediately.
 
Standard List of Accessories:
Inverter Host *1
Input Power Wire  (red and black)
Instruction Manual
Fuse *1 set

 

Recommended operational environment

The installation and operational environment of inverter should have the good ventilation, be away from the water source, heat source and inflammables and explosives. Do not install the inverter in the environment with the direct sunlight, dust, volatile gases, corrosive substances and high salinity. 

The range of working temperature of inverter should be -20℃~40℃. The inverter should not be operated at full load in the environment over 40℃. If it is required to be operated in the environment over 40℃, please follow the specification of 100% decrease at excessive 1℃.

The optimal working temperature of battery is 20℃~30℃. The application of battery in the environment over 30℃ will reduce its service life, while the application in the environment less than 20℃ will shorten its backup time.

 The front and back panel of inverter should be 60mm away from the wall or adjacent equipment at least.Do not cover the ventilation holes on the front and back panel of inverter, otherwise it will obstacle the ventilation and heat dissipation and thus increase the temperature inside the equipment and affect its service life.

 

Electrical cable connection

 

It should be confirmed that the switch of inverter is off and the equipment is placed properly before the electrical cable connection.

Do not reverse the positive and negative connection, otherwise it may damage the inverter. 

The procedure for electrical cable connection of inverter is as follows:

Put the switch of inverter at OFF state.

Connect the terminals of storage battery to the positive and negative poles of storage battery: the positive terminal of storage battery should be connected to the positive pole, while the negative terminal of storage battery should be connected to the negative pole.

It should be confirmed that the connection between the terminals and poles of storage battery is well, otherwise it may cause the heating of cable.

Turn on the switch and start the inverter.

Connect the load with the AC output socket on the output side panel of inverter.

 

 

Precautions

1. The AC output of this equipment should not be connected in parallel or with the power grid in any form, otherwise it may burn down the equipment.

2. To guarantee the safety and normal operation, the load power should be increased gradually and the total power of electrical appliances should not exceed the rated power of this equipment.

3. When using the inductive load, the load power should be selected by 2-3 times.

4. Because of the excessive transient start-up current for the vacuum pump and motor, other electrical equipments should be turned off before starting it. The frequent start-up is strictly forbidden.

5. The equipment should be installed in the place beyond the access of indoor personnel and with the good ventilation. This equipment should not be covered with other materials. There should be no inflammables or explosives around.

6. Do not access the battery with unspecified voltage to the input terminal of equipment, otherwise it may burn down the inverter.