5.8Ghz knob switch
product description
1: Wide range of applications
2: Simple and convenient installation
3: Safe and power saving, free from external influences such as sound and objects.
4: Strong anti-interference
5: high sensitivity
1: Wide range of applications
2: Simple and convenient installation
3: Safe and power saving, free from external influences such as sound and objects.
4: Strong anti-interference
5: high sensitivity
product overview:
When someone walks into the sensor and reaches the lighting requirement, the microwave switch is automatically turned on, the load electrical appliance starts to work, and the delay system is activated. As long as the human body does not leave the induction area, the load electrical appliance will continue to work. When the human body leaves the induction area, the sensor starts to calculate the delay, and when the delay ends, the sensor switch is automatically turned off, and the load electrical appliance stops working. Truly, safe, convenient and intelligent, energy saving.
When someone walks into the sensor and reaches the lighting requirement, the microwave switch is automatically turned on, the load electrical appliance starts to work, and the delay system is activated. As long as the human body does not leave the induction area, the load electrical appliance will continue to work. When the human body leaves the induction area, the sensor starts to calculate the delay, and when the delay ends, the sensor switch is automatically turned off, and the load electrical appliance stops working. Truly, safe, convenient and intelligent, energy saving.
Product features:
1. The induction is sensitive, and the movement of living and non-living bodies can be accurately identified, so that the error rate is reduced to a very low level.
2. Strong anti-interference: using 5.8GHz operating frequency, it is less affected by external natural factors, and the performance is stable and reliable.
3. Automatic metering: Automatically identify the intensity of ambient light, meet the lighting requirements and light up when there are people. Otherwise it does not light up.
4. Fully automatic induction: automatically turn on the lights after sensing people, turn on the lights when people come, and turn off the lights when people leave, safe and power-saving, free from external influences such as sound and objects.
Technical parameters:
Working voltage: AC85-250V
Standby power consumption: 0.9W
Transmit power: <10mA
Operating frequency: 5.8GHz
Induction distance: 2-16 meters (adjustable)
Working delay: adjustable from 8 seconds to 12 minutes
Light control illumination: 2-200LUX adjustable
Load power: 800W (resistive load) 200W (capacitive load)
notes:
1. Please disconnect the power supply before installation to avoid danger
2. The product is not waterproof, please pay attention to moisture-proof and waterproof.
3. The microwave induction angle is 360 degrees, please pay attention to the installation method.
4. There is high voltage inside the product, non-professionals should not disassemble or assemble it, otherwise the consequences will be at your own risk.
The induction illumination can be adjusted, the induction distance can be adjusted, and the delay time can be adjusted.
Sensing angle: built-in antenna surface 360 degrees;
Can be applied to any load: monitoring, alarm equipment, LED lamps, fluorescent lamps, incandescent lamps, exhaust fans, solenoid valves, etc. It can be installed in all lamps as induction lamps, and can also be sensed through the lampshade.
Humanized extended induction design: If someone continuously moves in the induction area, the induction signal will automatically change to prolong the induction time, and will not wait for the light to go out and re-sensing.
The wiring method is more scientific than other products, we have designed 2 inlet holes and 2 outlet holes. Easy wiring. And use a pluggable terminal. Easy and quick installation.
5.8Ghz Dial switch
technical parameter:Working voltage: AC85-250VStandby power consumption: 70mWTransmit power: <10mAOperating frequency: 5.8GHzInduction distance: 2-16 meters (adjustable)Working delay: adjustable from 10 seconds to 30 minutesLight control illumination: 5-500LUX adjustableLoad power: 800W (resistive load) 200W (capacitive load)
3.7Ghz embedded microwave radar sensor switch
Microwave sensors are active sensors. HF sensors emit high-frequency electromagnetic waves (3.7GHz) and receive their echoes. This sensor detects changes in the echoes and even small movements within its detection range. The microprocessor then triggers a "light on" command. Signals can be detected through doors, glass panes and thin walls.Good detection when a person or object is moving towards the light!The high-frequency output of this sensor is less than 10mW, which is only a percent of the transmitting power of mobile phones and microwave ovens.
product description:This product is a mobile module using 3.7GHz microwave induction, which can effectively detect moving objects. The module has a main control chip with a built-in high-precision algorithm unit, which can effectively filter out environmental interference.Features:1. Good stability, strong anti-interference, wide sensing range and high sensitivity.2. The control signal output delay time is adjustable and precise.3. External photodiode, does not work during the day (adjustable to work during the day).4. Induction penetration is strong, can penetrate wood, glass, walls, etc., (metal can not penetrate)5. The light is on when people come, and the light is off when people leave after the delay time.Product parameters:Product name: microwave sensorWorking voltage: AC 110V ~ 240V (50 ~ 60HZ)Quiescent current: 30uALoad power: 10ALoad capacity: control incandescent lamps ≤ 1000W, energy-saving lamps / fluorescent lamps ≤ 400W, LED lamps ≤ 200WMicrowave frequency: 3.7GHzSensing angle: 360 degreesDelay time: 1 second to 330 seconds (adjustable)Light control range: 7～500 LUX (adjustable)Sensing distance: 15 metersOperating temperature: -20 °C ~ +50 °CScope of application:It is suitable for automatic lighting of corridors, corridors, toilets, basements, warehouses, garages and other places, automatic ventilation of exhaust fans and automatic control of other electrical appliances.installation steps1. Open the hole, use the tool to open the object according to the opening size of the corresponding switch. Please be sure to open the hole according to the opening size. The opening size of this product is 80~85mm2. Correctly follow the connection method of the wiring diagram in the product instructions to connect the switch and Do not handle the wires of the lamp with electricity during installation.3. Put the spring buckles on both sides vertically, and install the object into the hole to confirm whether the size of the switch and the hole meet the requirements.4. After confirming the size of the opening and the correct wiring, put down the spring buckles on both sides of the switch, and confirm whether the installation is stable after putting it down.
Package list: 1* Microwave radar sensor switch (according buyer choose)