12" 10" Door Letter Box, 30cm 27cm Letterbox, uPVC Wood Composite Doors
![](https://s3-eu-west-1.amazonaws.com/images.linnlive.com/98c0f7ee2db4e864acbe6cee71abcd51/cec7dff0-f90b-4354-aaf3-aaf9496677a9.jpg)
Description
- INTERNAL DRAUGHT EXCLUDER - The integrated brushes help prevent draughts. Plus, an internal water seal prevents water leaks as it stops water getting into the door or panel.
- ANTI-SNAP FLAP - The flap opens a full 180 degree for easy access and to prevent it from snapping off when opened too far.
- ADJUSTABLE SLEEVE - The telescopic design means the letter box can be adjusted to fit doors between 20mm to 39mm or 40-80mm in thickness. Our letter box will fit most uPVC, Composite & Timber doors.
- DIMENSIONS - The letter box is available in 3 sizes: 10" 272mm x 70mm for doors 40-80mm in thickness; 12" 306mm x 70mm for doors 40-80mm in thickness; 12" 306mm x 70mm for doors 20-39mm in thickness.
- EASY TO INSTALL - EASY TO INSTALL - 1) Cut door aperture to the appropriate dimensions | 2) Separate the two letterplate halves and place the exterior gasket over metal fixing posts | 3) Take the half that contains brushes and insert into the aperture from the inside of the door | 4) Take the exterior half (with gasket) and slide into the letterplate tube from the outside of the door | 5) Before fixing. Take time to ensure the letterplate fully covers the aperture on both sides and that the exterior gasket does not protrude | 6) Use either the 2 short OR 2 long bolts (depending on your door thickness) and screw into centre hole at either end of the letterplate, ensuring that you DO NOT TO OVER TIGHTEN fixings |