☆ 2 Fisher 100 Vintage tube Amp Mono Block Rebuilt Recapped ☆Nichicon Fine Gold Cap☆

After the complete restoration and upgrade these sound amazing

Hello and welcome.

My feedback confirms that I ship very quickly and that thousands and thousands of my customers have been very happy with their shopping experience.

For sale today 

Fisher 100 Unit 1 (Serial No. 10051-A) Work Done:

Tested tubes; 5V4 rectifier missing, one 6L6 weak.

 Supplied 5V4 and installed the good output tubes

from Unit 2.

Removed improper power supply wiring; rewired correctly.

Replaced electrolytic cathode bypass capacitor, all

 paper/tubular capacitors, and one power supply

resistor.

Swapped fuse cap and replaced missing power fuse.

Replaced cracked neon pilot lamp.

Cleaned controls and switches.

Removed chassis dust and dirt as best as possible.

Cleaned external surfaces.

Supplied missing tube shields (2).

Tested power output into 8-ohm resistive load: 23 watts

 just before clipping level.

Ran several hours as a “burn-in” check.

Notes:

 Installed a Nichicon Fine Gold

capacitor in the cathode bypass role.

The supplied fuse cap was not compatible with the

 unit’s fuse holder with a fuse installed.

Fisher 100 Unit 2 (Serial No. 10971-A) Work Done:

Tested tubes; 5V4G rectifier missing, others okay.

 Supplied 5V4G and installed one good 6L6GB tube

from Unit 1, supplied the other 6L6GC.

Removed all power supply wiring, filter capacitors,

 broken power resistor assembly, and substantial tar

which had leaked from the output transformer; rewired

 correctly.

Replaced four filter capacitors (originally two per can),

 electrolytic cathode bypass capacitor, all

paper/tubular capacitors, and six power resistors.

Replaced cracked fuse holder, broken auxiliary

 receptacle, and damaged power cord.

Cleaned controls and switches.

Removed chassis dust and dirt as best as possible.

Cleaned external surfaces.

Supplied missing tube shields (2).

Supplied missing top cover screws (6).

Tested power output into 8-ohm resistive load: 18 watts

 just before clipping level.

Ran several hours as a “burn-in” check.

Notes:

Installed a Nichicon Fine Gold capacitor in the cathode

 bypass role.

 6L6 or 5881 (industrial grade 6L6) tubes installed.

 Thank you for your business !

 All electronics sold have been selectively marked to prevent theft or

 fraud or the replacement of components .

 Thank you for your

 understanding in this theft prevention measure. 

 I invite you to stop by my small and proud to be a  U.S.A. home based store 

http://stores.ebay.com/The-Old-Ladys-Treasures

Please visit my FB page The Old Ladys Treasures

Please contact me before leaving neutral or negative feedback

Rest assured I will resolve any issues 

We are very proud of our RETURN POLICY stating 100% satisfaction and that means we will return your money if the item is not as described.

Feed back is important to us . If you have found that after your visit you were happy , please be so kind as to leave 5 STAR'S .

Ebay considers under 5 stars to be below standards and it will affect my account in a negative manner 

Local Pick Up Ok 

 _gsrx_vers_1536 (GS 9.4 (1536))