![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_head.jpg)
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_shadow.jpg)
ENGMATE™ 5 Axis Kit for CNC DIY
1*5 Axis Breakout Board(Pro) + 5*EMA2-050D42 Microstep Motor Drivers + 5*EMA232-5615S4 Nema23 1.32N.m Stepper Motors + 1*24V 10A Switching Power Supply
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010450/Image/010450_banner.jpg)
The breakout board in this kit is professional version, which has been upgraded to an intelligent and industrial-level interface board set including control pad and display panel. Compared to standard version, professional version mainly has two more functions. One is the "computer G-code recording function", and the other is the "manual programing function".
• Computer G-code recording function
With the embedded intelligent memory chip, this breakout board can easily record MAXIMUM 4 axis' (X,Y,Z,A axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer.
• Manual programing function
The upgraded built-in manual control tools (display panel and control panel) not only can be used for manual motor control, but also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc.
The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.
In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. Please purchase this kit with confidence.
Why Purchase CNC Products in our store?
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_experience.jpg) | ![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_quality.jpg) | ![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_service.jpg) |
10+ Years Rich Experience | High Quality Product | Professional After-Sale Service |
We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have. | Stepper motors and drivers from ENGMATE™ are with high quality for stable and durable usage. | The professional technical support and excellent after-sales service are backed up by a loyal and experienced team. |
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_shadow.jpg)
5 Axis Professional Breakout Board
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/003827/Image/003827_details.jpg)
- • High performance, cost-effective
- • Parallel port communication
- • Automatic G-code recording for motor control
- • Manual G-code programming for motor control without computer
- • The 5th axis (B axis) on the breakout board can be used as a PWM signal output interface for controlling frequency inverter via software (e.g. Mach3 etc.) to adjust speed of main spindle
- • Equipped with the display panel and control pad for manually control the stepper motor
- • Automatically finish Tool-settings on X, Y, Z Axis via the control pad , without the support of the computer
- • Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis' (X, Y, Z A axis etc.) values on its screen, it is completely synchronous with the values' changing on the FOUR coordinates of Mach
- • 2 ways to get power , 5V DC power supply or USB port to get power from PC directly
- • Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market
- • 2-stage signal processing, smooth signal transmission, powerful anti-jamming
- • With Relay output control interface, available to control the spindle motor, air pump, water pump, etc.
- • 5 Types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
- • Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software , etc.
- • Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_shadow.jpg)
Digital Hybrid Microstepping Driver (EMA2-050D42)
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010269/Image/010269_details.jpg)
- • Extra-low motor noise offers excellent quietness
- • Supply voltage from 18-50V DC
- • Output current programmable, with 8 stalls output current setting, from 1.0A-4.2A (Peak)
- • Adoption of 32-bit DSP, pure sine wave subdivision technology
- • Low-vibration and low temperature rising.
- • Microstep resolutions programmable, with 15 stalls microstep subdivision setting
- • Automatic half-current reduction as long as switching off SW4 when motors stop
- • Internal optical isolation, pulse input frequency up to 200KHz
- • Support PUL/DIR mode
- • Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged
- • Suitable for 2-phase and 4-phase Hybrid stepper motors
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010231/Image/010231_g_img.jpg)
Hybrid Stepper Motor (EMA232-5615S4)
- • High torque, more smooth movement
- • High efficiency, energy-saving, low noise and low vibration
- • High start torque, low start current and reliable performance
- • Simple 4 wires ensure easier wiring, installation and maintenance
24V 10A Switching Power Supply
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/001573/Image/001573_g_img.jpg)
- • High efficiency, high reliability, low cost
- • Adjustable ±10% Output Voltage support
- • PWM control and regulation, insure the steady and precise output voltage
- • Over-temperature protection: built-in a powerful fan for cooling. RTH3≥45°C, fan on. RTH3≥85°C, output shutdown
- • Built-in EMI filter
- • 100% full load burn-in test
- • Over current, over voltage, short circuit
- • Low output ripple and yawp
Common-cathode Connection
Applications
Suitable for a variety of small sized automation equipment and instruments.
- • For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc...
- • For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc...
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_application.jpg)
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_shadow.jpg)
Model NO. | Min Motor Size | Max Motor Size | Recommended Supply Voltage | Recommended ENGMATE Stepper Motors |
EMA2-040D15 | NEMA 8 | NEMA 17 | 24V DC | EMA112-4506S4, EMA162-3805S4 |
EMA2-040D22 | NEMA 8 | NEMA 17 | 24V DC | EMA082-4208S4, EMA142-4520S4 |
EMA2-050D42 | NEMA 17 | NEMA 23 | 24V/36V DC | EMA172-6015S4, EMA232-5615S4 |
EMA2-050D56 | NEMA 23 | NEMA 34 | 36V DC | EMA232-7630S4, EMA232-11235S4 |
EMA2-070D56 | NEMA 23 | NEMA 34 | 48V DC | EMA242-8840S4, EMA342-7842S4 |
EMA2-080D72 | NEMA 23 | NEMA 34 | 60V DC | EMA342-10050S4, EMA342-15662S4 |
EMA2-080A72 | NEMA 34 | NEMA 42 | 80V DC | EMA422-15065S4 |
EMA2-220A80 | NEMA 34 | NEMA 52 | 110V/220V AC | EMA422-20180S4 |
![](https://www.gbeshop.com/InfoBase/SAVEBASE/PKG/010292/Image/010292_driver_motor_illustration.jpg) |