Description

Laser Tree K30 is a real 30W+ output laser module designed for powerful cutting. It uses beam compression technology, built-in 6pcs 5.5W laser diodes. The comprehensive product configuration realizes compatibility with various laser engraving machines. The adapter board is used for electrical compatibility (suitable for Z*aitu,O*tur,Tw* Trees,S*ulpful9, Xtool, A*omstack and other models of DIY laser engraving machines). The sliding plate has multiple holes for installation compatibility. Built-in air assist improves cutting performance, and excellent heat dissipation improves product stability and service life. If you need to cut a lot of thick materials and speed up production, the powerful Laser Tree K30 is a good choice.

 


Ultrahigh Power Laser ModuleK30 is a high power 30W+ (33W-35W)optical power laser module, built-in 6pcs 5.5W beam compressed laser diodes 
Cut 15mm bass plywood: 180mm/min, 100% power, by one pass
Cut 15mm black acrylic: 35mm/min, 100% power, by one pass
Cut 30mm pine wood: 120mm/min, 100% power, by one pass

 
When engraving, the higher the laser power setting, the more visible the engraving will be. If the power remains the same, the engraving will be more visible if the speed is slower. If the power and speed remain the same, the smaller the line gap, the more obvious the engraving will still be. Therefore, we have created a grayscale test template for engraving test, which is for different speed and different power for engraving test, with a fixed line gap of 0.1mm.When you want to use the same material for engraving, you can refer to our test results to choose the suitable parameter settings.

Applica ble Materials  Plywood, Pine board, wood, solid wood, black acrylic, MDF, stone, bamboo, coated glass, Mirror stainless steel, Brushed stainless steel, plastic, leather, aluminum oxide, non-reflective electroplating layer, and lacquered metal, after blackening Utility knife. 
Note: Unable to engrave blue/purple/white/transparent material and aluminum without oxide layer

Notes:

1. Ensure you are clear about the product specification, datasheet,  and operating instructions before usage.

2. Protect your yourself from the laser when you operate on it.

3. Ensure your safety during operating when power connected.



Tip:
Cutting Material Types：
all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, black acrylic board, cardboard, bamboo chips, leather, some plastic boards, fiberglass board.

Engraving Material Types：
all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, bamboo, cardboard, plastic, leather, fiberglass board, aluminum oxide, stainless steel(non-specular surface), ceramics, dark stone.

Additional Notes：
1. Materials that are not easily oxidized/decomposed/melted at high temperatures cannot be engraved/cut;
2. All transparent materials cannot be engraved/cut, and white/blue/purple materials cannot be directly carved/cut except for materials such as wood, cloth, paper, and leather;
3. Unoxidized aluminum, silver color alumina, copper, silver and gold cannot be engraved;
4. The electroplating material needs to determine the coating composition first;
5. All metals cannot be cut.