|
Tektronix TEK CableScout TV220 Coax CATV TDR Cable Tester
The TV220 tests at a high bandwidth (it uses a 400 MHz acquisition system)
Designed specifically for CATV and coaxial cable, the TV220 applies the newest technology to provide both ease of use and coaxial cable testing performance not found in any other TDR.
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
The TV220 delivers high performance, yet is so easy to use that little or no training is required. This leading edge TDR can test more system bandwidth and expose faults that have been previously invisible to TDR yet still an impairment to digital signals. The TV220 also introduces one-button testing.
Testing at Higher Bandwidth
Because the TV220 tests at a high bandwidth (it uses a 400 MHz acquisition system), it tests more of your system capacity. This enables users to pinpoint more faults that can cause micro-reflections which can degrade digital transmission BER. Only the TV220 has the bandwidth to enable you to find problems that may exist only at higher frequencies.
High SNR
The TV220 also has extremely high signal-to-noise ratio (SNR). Tempo proprietary circuit designs reduce the noise level so that "bumps" on the trace represent real faults, not just noise. Events that were previously difficult or impossible to find are clearly visible (because the noise is much lower) with the TV220. This means that you can clearly see faults further away.
High Resolution
High-resolution performance allows the TV220 to locate problem components in the customer drop. The TV220 uses a pulse width of only 1 ns which means the operator can clearly identify multiple events that are less than 2 feet apart. This enables the technician to tell which of two components on a cable is causing the problem, even when they are close together. This is particularly important in troubleshooting drops, because components such as splitters and ground blocks can be very close together.
TestWizard Testing
But the most innovative feature in the TV220 is TestWizard automated testing and event marking. Now, instead of meticulously setting up the TDR and then carefully interpreting the meaning of the displayed waveform, you push one button to get a high-resolution, low-noise trace, with the events clearly marked. This means substantial savings in training time and reduced time to get accurate, repeatable measurements.
The Only TDR for Digital Services
High bandwidth, high resolution, high SNR and ease of use make the TV220 the only logical choice for digital services. The TV220 tests more of the capacity of your cable, finds faults that are closer to the ends and finds faults that are closer together than any other TDR available.
CableScout TV220 Helps Solve Tough Problems
Any TDR can find a break or major problem, but what about those small nagging cable faults that keep your system from running smoothly CableScout TV220 can find those really tough-to-identify problems, and it is easy (see examples below). A high performance TDR does not have to be difficult to use. This one makes even the first time user look like a pro.
The TV220 - Designed for You
If your job is to maintain or find faults on coaxial cable, the Tempo CableScout TV220 is built for you. With the TV220, you'll spend less time operating the instrument and more time analyzing and repairing faults.
You know the problems we're talking about - the annoying small ones that cause a 3 dB notch near the upper end of your bandwidth. Now you can accurately locate them - fast and easy.
You get all this performance in the industry's most rugged TDR package. Come snow, rain, heat, humidity, dead of night or untrained user, Cable Scout TV220 keeps working, because you have to.
Features:
- Excellent for Digital Services Provisioning
- Easy to Use - Anyone Can Use It
- TestWizardTM - One-button Testing
- Automatic Return Loss Measurements
- Automatic Multiple Event Marking
- High-resolution, Short Pulse Width (1 ns)
- Withstands a Two Meter Drop
- Large, Backlit, High-resolution Display (640 X 440), 7.2 in. Diagonal
- Internal Memory for 20 Waveforms and Notes
- Serial Printer Output for Stored or Displayed Waveforms
Specifications:
| Test Signal Output |
1/2 sine
|
|
Amplitude (into 75 Ohm)
|
4 V into 75 Ohm
|
|
Pulse Widths
|
1 ns, 5 ns, 25 ns
|
|
Output Impedance
|
75 Ohm
|
|
Acquisition System Bandwidth
|
400 MHz
|
|
TestWizard Testing
|
Automatically marks faults. Operator choice of three levels of event marking:
- Mark largest event
- Mark three largest events
- Mark all events
|
|
Return Loss
|
Automatic at cursor location
Resolution: ±1 dB
|
|
Input Protection
|
±400 VDC + peak AC up to 440 Hz, 30-second duration
|
|
Maximum Distance Range
|
12,000 ft. (3,658 m), depending on cable type and condition
|
|
Gain
|
0 to 72 dB
|
|
Distance Accuracy - (feet)
|
0 to 2,000 ft.: ±2 ft. ± uncertainty in Vp
2,001 to 6,000 ft.: ±3 ft. ± uncertainty in Vp
6,001 to 12,000 ft.: ±4 ft. ± uncertainty in Vp
|
|
Distance Accuracy - (meters)
|
0 to 610 m: ±0.6 m ± uncertainty in Vp
610 to 1830 m: ±0.9 m ± uncertainty in Vp
1830 to 3658 m: ±1.2 m ± uncertainty in Vp
|
|
Display
|
Resolution: 640 x 440 (281,600 pixels)
Size: 7.2 inch.
Type: high contrast LCD.
Backlight: operator switchable.
|
|
Waveform Display Resolution
|
0.33% of selected range, 4.5 cm (0.15 ft.) minimum.
|
|
Display Ranges
|
Twelve display ranges from 6 ft. (1.8 m) to 12,000 ft. (3,658 m), plus single-button zoom window.
|
|
Temperature
|
Operating: -10°C to +40°C (+11°F to +104°F)
Nonoperating: -20°C to +60°C (-4°F to +140°F)
|
|
Humidity
|
10% to 95% (noncondensing)
|
|
Field Usage
|
Shock, water and dust resistant
|
|
Durability
|
Survives drop of 2 meters (6 ft.) to concrete in standard soft case. Drip proof, dust resistant
|
|
EMI Emissions -
|
-EN55011, class A
-FCC Part 15, Subpart B, Class A
-EN60555-2
|
|
AC Operation
|
Voltage Ranges: 110 V, 220 V or 240 V with appropriate AC to DC adapter
Line Frequency: 50 Hz to 60 Hz
|
|
DC Operation
|
Voltage Range: 9 to 16 VDC @ 1 A (charging and operating)
|
|
Battery Operation
|
Type: internal lead acid rechargeable battery
Operating Time: typically 8 hours continuous operation (backlight off)
Battery Savers (user selectable) - Shutoff: 5 to 30 minutes or disabled
Backlight: shutoff 5 to 30 minutes, disabled or always on
|
Dimensions:
Height
Width
Depth
Weight |
24 cm (9.5 inches)
30 cm (11.5 inches)
9 cm (3.5 inches)
3 kg (6.4 lbs.)
|
For full Tektronix / Tempo TV220 product specifications, please click here: Tektronix TV220
|
We Ship World Wide!
