H&R Wheel Spacers
Silver Edition
Width: 2 x 15mm
PCD: 4x100
Centerbore: 56,6mm
H&R wheel spacer system DR Silver Edition
H&R Spacers DR 2x15mm 3024566 for DAEWOO Espero, Lanos, Nexia, Nubira
H&R TRAK+ Wheel spacers System DR improve the look as well as the handling of your car and are compatible with both stock and aftermarket wheels. Wheel spacers are an ideal complement to lowering springs or coilovers. By installing H&R spacers, the wheels fill the wheel arches properly, which significantly improves the look and the driving behavior.Product benefits:
All screws for the DR Systems have to be ordered separately.
H&R product code: 3024566
Please note additional information and vehicle-specific technical notes!
DR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper round loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.
For all cars with 4-hole wheel.
10.) On some models the centering stubs are longer than 15 mm and have to be shortened to a length of 15mm max. when using a 30 mm System or the spacer has to be thicker (at least a 20 mm-System)
2.) Only valid in Germany
3.) All DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12/d24 mm for M14/d28 mm Round-head for M12/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1 25 Flat-head for PORSCHE-original-wheels M14x1 5 Safety Guidelines (No. of turns for wheel screws) M12x1 5 = 6 5 turns = approx. 10 mm of load bearing shaft length M12x1 25 = 8 0 turns = approx. 10 mm of load bearing shaft length M12x1 75 = 6 5 turns = approx. 12 mm of load bearing shaft length M14x1 5 = 7 5 turns = approx. 12 mm of load bearing shaft length 1/2"UNF = 8 0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).
Fits for:
| Manufacturer | Model | Construction year | Certificate |
|---|---|---|---|
| DAEWOO | ESPERO (KLEJ) | 01.01.1995 --> 01.06.1999 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.02.1995 --> 01.06.1999 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.02.1995 --> 01.09.1999 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.03.1995 --> 01.12.1997 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.09.1993 --> 01.06.1999 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.09.1993 --> 01.10.1994 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.10.1991 --> 01.04.1998 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.10.1993 --> 01.09.1997 | FG** |
| DAEWOO | ESPERO (KLEJ) | 01.10.1997 --> 01.08.1999 | FG** |
| DAEWOO | LANOS (KLAT) | 01.04.1997 --> | FG** |
| DAEWOO | LANOS (KLAT) | 01.05.1997 --> | FG** |
| DAEWOO | LANOS (KLAT) | 01.10.1997 --> 01.06.1999 | FG** |
| DAEWOO | LANOS Stufenheck (KLAT) | 01.02.1997 --> | FG** |
| DAEWOO | LANOS Stufenheck (KLAT) | 01.05.1997 --> | FG** |
| DAEWOO | LANOS Stufenheck (KLAT) | 01.10.1997 --> 01.06.1999 | FG** |
| DAEWOO | LANOS Stufenheck (KLAT) | 01.10.1997 --> 01.12.2005 | FG** |
| DAEWOO | NEXIA Stufenheck | 01.02.1995 --> 01.06.2008 | FG** |
| DAEWOO | NEXIA Stufenheck | 01.02.1995 --> 01.08.1997 | FG** |
| DAEWOO | NEXIA Stufenheck | 01.04.1999 --> 01.03.2001 | FG** |
| DAEWOO | NEXIA Stufenheck | 01.07.2008 --> | FG** |
| DAEWOO | NEXIA Stufenheck | 01.08.1996 --> 01.08.1997 | FG** |
| DAEWOO | NEXIA Stufenheck | 01.08.1997 --> 01.06.2008 | FG** |
| DAEWOO | NEXIA | 01.02.1995 --> 01.08.1997 | FG** |
| DAEWOO | NEXIA | 01.08.1996 --> 01.08.1997 | FG** |
| DAEWOO | NUBIRA (J100) | 01.05.1997 --> | FG** |
| DAEWOO | NUBIRA (J100) | 01.05.1997 --> 01.05.2000 | FG** |
| DAEWOO | NUBIRA (J100) | 01.08.2002 --> 01.07.2003 | FG** |
| DAEWOO | NUBIRA (J100) | 01.09.1998 --> 01.12.1999 | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.04.1997 --> 01.04.1998 | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.04.1997 --> 01.05.1999 | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.05.1997 --> | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.05.1997 --> 01.05.2000 | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.06.1999 --> 01.07.2003 | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.07.2000 --> | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.09.1998 --> 01.12.2002 | FG** |
| DAEWOO | NUBIRA Stufenheck (J100) | 01.12.2000 --> | FG** |
| DAEWOO | NUBIRA Stufenheck (J200) | 01.07.2003 --> | FG** |
| DAEWOO | NUBIRA Stufenheck (J200) | 01.10.2003 --> 01.12.2004 | FG** |
| DAEWOO | NUBIRA Wagon (J100) | 01.05.1997 --> | FG** |
| DAEWOO | NUBIRA Wagon (J100) | 01.05.1997 --> 01.05.2000 | FG** |
| DAEWOO | NUBIRA Wagon (J100) | 01.06.1997 --> | FG** |
| DAEWOO | NUBIRA Wagon (J100) | 01.09.1998 --> 01.12.2002 | FG** |
| DAEWOO | NUBIRA Wagon (J100) | 01.12.2000 --> | FG** |
| DAEWOO | NUBIRA Wagon (J200) | 01.06.2004 --> | FG** |
| DAEWOO | NUBIRA Wagon (J200) | 01.07.2003 --> | FG** |
|
TÜV**: Application based on TUV certificate. ABE**: Application based on general operating license issued by german KBA. FG**: Application based on max load testing report. |
|||
H&R | Wheel Spacers
H&R TRAK+ Wheel Spacers improve the look as well as the handling of your car while being compatible with both the stock and aftermarket wheels.Product Benefits: