PLEASE accept my apologies for the dreadful photos. The one in the photos was only dry-assembled & the trims held in place with bulldog clips to get some photos.
This bridge is delivered as a kit and is ready for paint.
I suggest the use of PVA wood glue along with a few grains of table salt to prevent slippage.
These single track bridges are made using a CNC laser and are manufactured from 2mm and 3mm MDF & HDF. Each vertical frame is made of 3mm thick MDF with 2mm trims, the horizontal members are keyed into the verticals. The 3mm thick deck is keyed & glued into the Girder frames.
The 3mm thick wind bracing frame is keyed & glued onto the top of the Girder frames.
The total extents of this bridge is: 1310mm long (c51.5"), 88mm wide and 110 high, the recommended maximum span is 1290mm (c.50.75"). The interior width of the bridge is 75mm wide and offers a vertical clearance of 98mm between the surface of the deck and the wind bracing panels.
This is a strong bridge when properly assembled but you may choose to provide a little additional support if you are using heavy rolling stock.
Everything that we produce is made at our workshop in Yorkshire. We pride ourselves on our manufacturing standards, our turn-around times and our reputation for customer satisfaction. Please take a look at our feedback, it says it all.
We design and make everything that we sell which means that we are free to make off-book variations that may better service your use case. If you want a variation then please ask via eBay Messaging.
Wherever possible, our packaging is made from recycled materials and are letter-box friendly to enable easy unattended delivery.
We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you as soon as we can and do our best to help you out. We encourage our customers to contact us with any questions or concerns. We want to be sure that you are completely satisfied with your purchase.