New Slotting Blade Machining Center CNC Lathe Arbor Machine Cutter Keyway Broach

The slotting tool is a non calibrated product, which is designed and customized by us according to your workpiece drawings, product materials and the equipment you use

The price and delivery date can only be reported after you provide the above information

The blade is made of hard alloy and coated with Balchas or TVSELI,

The cutter bar material is determined according to the structure, generally (42CrMo, GCr15 SKD61, Cr12MoV), salt bath quenching

After the order is confirmed, we will issue the design drawings (drawings conforming to the national standards), and then both parties will negotiate with you to determine that the production will be arranged after your standards are metPrecautions during use

Please pay attention to the following points when using the slotting tool.

1. When used with CNC lathe, if there is no spindle locking function, the workpiece may move during processing, and the groove width may become wider, so it cannot be used. When the machining center is used, the spindle needs to be fixed in the same way.

2. When it is installed on the side lock bracket of the machining center to try to use, the handle part may be too long to touch the collar part. In this case, cut the handle to fit it and hit it. We also accept orders of short handle specifications as special products

3. When machining square holes or hexagonal holes, make the guide holes larger than the side. Because of the processing method, some parts will not be hit by the blade. Therefore, R remains on the opposite side after treatment. It is impossible to machine quadrilaterals and hexagons as accurately as WEDM by this method.

.Tips

Please check the user manual carefully.

If you have any questions please contact us. 

Please DO NOT Leave A Negative or Neutral Feedback Before Contacting Us.

Thank you for your support and Understanding.