Same Day Shipping before 1:00pm Free Shipping to the Continental US Hassle Free Returns Custom Bundle

Package: Polk Audio DB1042SVC 10" 1050 Watt Single 4-Ohm Car or Marine Subwoofer + Rockville RQB10 Single 10" Vented Subwoofer Enclosure With 1.4 cu. ft. of Air Space + COMPLETE SINGLE ENCLOSURE INSTALLATION KIT WITH 14 AWG SPEAKER WIRE + DRYWOOD SCREWS + SPADE TERMINALS

Click Thumbnails to Enlarge

Condition and Warranty

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

Product Description

Package Includes:

  • (1) Polk Audio 10” Car/Marine Audio Subwoofer
  • (1) Rockville Single 10" Vented Ported Subwoofer Sub Box Enclosure
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

Authorized Polk Dealer!

Description for Polk Sub:

Rich Deep Bass, On the Go
Delivers thunderous sonic output and powerful low frequency response whenever… that will get your heart pumping.

Marine Certified
Built to last for cars, boats and ATVs with an IP56 rating and tested for Salt-fog, UV & Humidity.

Space Saving Design
Slimmed down form factor reduces the need for oversized subwoofer enclosures for a look that goes virtually unnoticed—but a sound that doesn’t.

Dynamic Balance Technology
Patented process that guides material selection through rigorous testing that identifies and cancels out unwanted resonant frequencies.

Included:

  • One 10" 4 ohm subwoofer
  • Stainless steel mounting hardware

Features:

  • Polk Audio DB1042SVC 10” 1050 Watt Single 4-Ohm Car/Marine Audio Subwoofer Sub
  • Driver Compliment: 10" (254mm)
  • Cutout Dimensions: 9" (230mm)
  • Mounting Height: 0.52" (13.21mm)
  • Mounting Depth (Top): 4.34" (110mm)
  • Mounting Depth (Bottom): 4.56" (116mm)
  • Peak Power Handling: 1050 Watts
  • Continuous Power Handling: 350 Watts RMS
  • Nominal Impedance: 4 Ohms
  • Frequency Response: 28Hz-200kHz
  • Sensitivity: 85 dB
  • Magnet Weight: 45.7 oz
  • Magnet Material: Ceramic
  • Magnet Size: 140mm x 65mm x 20mm
  • VC Diameter: 2"
  • Minimum Sealed Enclosure: 1.0 cu. ft.
  • Maximum Sealed Enclosure: 2.4 cu. ft.
  • Minimum Vented Enclosure: 1.25 cu. ft.
  • Maximum Vented Enclosure: 1.75 cu. ft.

https://www.audiosavings.com/content/ebay/assets/index.jpg

Features of Rockville Enclosure:

  • Rockville RQB10 Single 10" Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft 
  • Single 10" Side Ported
  • Finished with Durable Bed Liner
  • 3/4" MDF
  • High Quality Spring Loaded Terminal
  • Air Space: 1.4 Cubic Feet
  • Tuning Freq- 39Hz
  • Mounting Depth: 8"
  • Height: 11"
  • Width: 20"
  • Depth: 14"
  • Cutout diameter: 9.185"


About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.


Complete Single Subwoofer Enclosure Installation Kit!

Includes:

  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Return Policy

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

  • We will send you a pre-paid shipping label to replace the item for a brand new one.
  • We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
  • If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.

Item Code: DB1042SVC+RQB10+K1

Home  /  About Us  /  Contact Us  /  Returns  /  FAQ's
Copyright © 2016 Audio Savings, All rights reserved.  |  eBay Template Design