FOCUSRITE - RED 16LINE - Interface audio 64 x 64 Thunderbolt 3

La Red 16Line est dotée à la fois de connecteurs DigiLink et Thunderbolt, il est maintenant plus facile que jamais de passer de Pro Tools | HD à un séquenceur audio/Midi natif, sans avoir à reconfigurer les cartes optionnelles de l’interface. Comme toutes les interfaces de la série Red, la 16Line offre des niveaux de latence exceptionnels.

Les convertisseurs audio haute performance offrent une plage dynamique de 118 dB en entrée et 121 dB en sortie. Ils ont été spécialement étalonnés pour fournir le meilleur équilibre entre qualité sonore, dynamique et latence de conversion. La latence ultra­-basse de la Red transfigure complètement votre flux de travail. Si vous avez l’habitude de manier des mixages différents (l’un pour le monitoring d’entrée et les overdubs, l’autre avec le séquenceur pour le playback), il est maintenant tout à fait possible d’effectuer votre mixage logiciel avec votre séquenceur pour les niveaux d’entrée, les casques, les overdubs et le mixage dans la même session avec tous vos plug-­ins en insert.

La Red 16Line dispose de 16 entrées ligne au format D-­sub, associées à 16 sorties ligne et 2 sorties principales (monitor). Les 2 préamplis Micro à commande numérique offrent jusqu’à 63 dB de gain ultra-propre, avec "link" stéréo, alimentation fantôme individuelle, filtre passe-­haut, polarité et mode Air, la signature sonore du transformateur classique des Préamplis ISA Focusrite. Avec une carte Dante à 2 ports, vous pourrez étendre votre studio en Ethernet pour plus de canaux à des fréquences d’échantillonnage plus élevés, partout dans votre réseau, à faible latence et à moindre coût.

Caractéristiques :

• Connexions Pro Tools HD
• Connecteurs réseau audio Dante
• Résolution Max : 24 bits / 192 kHz
• Convertisseur AN avec plage dynamique de 118 dB
• Convertisseur NA avec plage dynamique de 121 dB
• 2 préamplis micro à commande numérique Red Evolution avec gain jusqu'à 63 dB, filtre passe-haut, inversion de phase et alimentation fantôme +48V commutable
• 3 écrans OLED
• Format rack 19" - 1U
• Dimensions (LxHxP) : 483 x 44 x 340 mm
• Poids : 5,04 kg
• Livré avec logiciel mixeur et de commandes Focusrite ainsi que des plug-ins d'égalisation et de compresseur compatibles
• AAX/AU/VST Red 2 et Red 3 EQ et Red 3

Connexions:

• 2x entrées micro XLR
• 2x entrées instrument jack 6,3 mm
• 16x entrées ligne Sub-D 25
• 16x sorties ligne Sub-D25
• 2x sorties moniteurs : jack 6,3 mm
• 2x entrées et sorties ADAT
• Entrée et sortie S/PDIF coaxiales
• Synchronisation de l'entrée et de la sortie de l'horloge et de boucle Word Clock BNC
• 2x connecteurs DANTE
• 2x connexions Thunderbolt 3
• 2x fiches casque stéréo jack 6,3 mm
• 2 x fiches Mini DigiLink

FOCUSRITE - RED 16LINE - Interface audio 64 x 64 Thunderbolt 3

The Red 16Line features both DigiLink and Thunderbolt connectors, now it's easier than ever to go from Pro Tools | HD to a native audio/Midi sequencer, without having to reconfigure the optional interface cards. Like all interfaces in the Red series, the 16Line offers exceptional levels of latency.

High-performance audio converters provide dynamic range of 118dB input and 121dB output. They have been specially calibrated to provide the best balance between sound quality, dynamics and conversion latency. Red's ultra-low latency completely transforms your workflow. If you are used to handling different mixes (one for input monitoring and overdubs, the other with the sequencer for playback), it is now quite possible to perform your software mix with your sequencer for input levels, headphones, overdubs and mixing in the same session with all your insert plug-ins.

The Red 16Line has 16 line inputs in D-sub format, associated with 16 line outputs and 2 main outputs (monitor). The 2 digitally controlled mic preamps deliver up to 63dB of ultra-clean gain, with stereo "link", individual phantom power, high pass filter, polarity and Air mode, the classic Transformer sound signature of Focusrite ISA Preamps. With a 2-port Dante card, you'll be able to expand your studio over Ethernet for more channels at higher sample rates, anywhere in your network, at low latency and at lower cost.

Features :

• Pro Tools HD Connections
• Dante audio network connectors
• Max resolution: 24 bit / 192 kHz
• AD converter with 118 dB dynamic range
• DA converter with 121 dB dynamic range
• 2 Red Evolution digitally controlled mic preamps with up to 63dB gain, high-pass filter, phase inversion and switchable +48V phantom power
• 3 OLED screens
• 19" - 1U rack format
• Dimensions (WxHxD): 483 x 44 x 340 mm
• Weight: 5.04kg
• Comes with Focusrite mixer and controls software plus compatible EQ and compressor plug-ins
• AAX/AU/VST Red 2 and Red 3 EQ and Red 3

Connections:

• 2x XLR mic inputs
• 2x 6.3 mm jack instrument inputs
• 16x Sub-D 25 line inputs
• 16x Sub-D25 line outputs
• 2x monitor outputs: 6.3 mm jack
• 2x ADAT inputs and outputs
• Coaxial S/PDIF input and output
• Synchronization of the input and output of the clock and loop BNC Word Clock
• 2x DANTE connectors
• 2x Thunderbolt 3 connections
• 2x 6.3mm jack stereo headphone plugs
• 2 x Mini DigiLink plugs

FOCUSRITE - RED 16LINE - Interface audio 64 x 64 Thunderbolt 3

The Red 16Line features both DigiLink and Thunderbolt connectors, now it's easier than ever to go from Pro Tools | HD to a native audio/Midi sequencer, without having to reconfigure the optional interface cards. Like all interfaces in the Red series, the 16Line offers exceptional levels of latency.

High-performance audio converters provide dynamic range of 118dB input and 121dB output. They have been specially calibrated to provide the best balance between sound quality, dynamics and conversion latency. Red's ultra-low latency completely transforms your workflow. If you are used to handling different mixes (one for input monitoring and overdubs, the other with the sequencer for playback), it is now quite possible to perform your software mix with your sequencer for input levels, headphones, overdubs and mixing in the same session with all your insert plug-ins.

The Red 16Line has 16 line inputs in D-sub format, associated with 16 line outputs and 2 main outputs (monitor). The 2 digitally controlled mic preamps deliver up to 63dB of ultra-clean gain, with stereo "link", individual phantom power, high pass filter, polarity and Air mode, the classic Transformer sound signature of Focusrite ISA Preamps. With a 2-port Dante card, you'll be able to expand your studio over Ethernet for more channels at higher sample rates, anywhere in your network, at low latency and at lower cost.

Features :

• Pro Tools HD Connections
• Dante audio network connectors
• Max resolution: 24 bit / 192 kHz
• AD converter with 118 dB dynamic range
• DA converter with 121 dB dynamic range
• 2 Red Evolution digitally controlled mic preamps with up to 63dB gain, high-pass filter, phase inversion and switchable +48V phantom power
• 3 OLED screens
• 19" - 1U rack format
• Dimensions (WxHxD): 483 x 44 x 340 mm
• Weight: 5.04kg
• Comes with Focusrite mixer and controls software plus compatible EQ and compressor plug-ins
• AAX/AU/VST Red 2 and Red 3 EQ and Red 3

Connections:

• 2x XLR mic inputs
• 2x 6.3 mm jack instrument inputs
• 16x Sub-D 25 line inputs
• 16x Sub-D25 line outputs
• 2x monitor outputs: 6.3 mm jack
• 2x ADAT inputs and outputs
• Coaxial S/PDIF input and output
• Synchronization of the input and output of the clock and loop BNC Word Clock
• 2x DANTE connectors
• 2x Thunderbolt 3 connections
• 2x 6.3mm jack stereo headphone plugs
• 2 x Mini DigiLink plugs

FOCUSRITE - RED 16LINE - Interface audio 64 x 64 Thunderbolt 3

The Red 16Line features both DigiLink and Thunderbolt connectors, now it's easier than ever to go from Pro Tools | HD to a native audio/Midi sequencer, without having to reconfigure the optional interface cards. Like all interfaces in the Red series, the 16Line offers exceptional levels of latency.

High-performance audio converters provide dynamic range of 118dB input and 121dB output. They have been specially calibrated to provide the best balance between sound quality, dynamics and conversion latency. Red's ultra-low latency completely transforms your workflow. If you are used to handling different mixes (one for input monitoring and overdubs, the other with the sequencer for playback), it is now quite possible to perform your software mix with your sequencer for input levels, headphones, overdubs and mixing in the same session with all your insert plug-ins.

The Red 16Line has 16 line inputs in D-sub format, associated with 16 line outputs and 2 main outputs (monitor). The 2 digitally controlled mic preamps deliver up to 63dB of ultra-clean gain, with stereo "link", individual phantom power, high pass filter, polarity and Air mode, the classic Transformer sound signature of Focusrite ISA Preamps. With a 2-port Dante card, you'll be able to expand your studio over Ethernet for more channels at higher sample rates, anywhere in your network, at low latency and at lower cost.

Features :

• Pro Tools HD Connections
• Dante audio network connectors
• Max resolution: 24 bit / 192 kHz
• AD converter with 118 dB dynamic range
• DA converter with 121 dB dynamic range
• 2 Red Evolution digitally controlled mic preamps with up to 63dB gain, high-pass filter, phase inversion and switchable +48V phantom power
• 3 OLED screens
• 19" - 1U rack format
• Dimensions (WxHxD): 483 x 44 x 340 mm
• Weight: 5.04kg
• Comes with Focusrite mixer and controls software plus compatible EQ and compressor plug-ins
• AAX/AU/VST Red 2 and Red 3 EQ and Red 3

Connections:

• 2x XLR mic inputs
• 2x 6.3 mm jack instrument inputs
• 16x Sub-D 25 line inputs
• 16x Sub-D25 line outputs
• 2x monitor outputs: 6.3 mm jack
• 2x ADAT inputs and outputs
• Coaxial S/PDIF input and output
• Synchronization of the input and output of the clock and loop BNC Word Clock
• 2x DANTE connectors
• 2x Thunderbolt 3 connections
• 2x 6.3mm jack stereo headphone plugs
• 2 x Mini DigiLink plugs

FOCUSRITE - RED 16LINE - Interface audio 64 x 64 Thunderbolt 3

The Red 16Line features both DigiLink and Thunderbolt connectors, now it's easier than ever to go from Pro Tools | HD to a native audio/Midi sequencer, without having to reconfigure the optional interface cards. Like all interfaces in the Red series, the 16Line offers exceptional levels of latency.

High-performance audio converters provide dynamic range of 118dB input and 121dB output. They have been specially calibrated to provide the best balance between sound quality, dynamics and conversion latency. Red's ultra-low latency completely transforms your workflow. If you are used to handling different mixes (one for input monitoring and overdubs, the other with the sequencer for playback), it is now quite possible to perform your software mix with your sequencer for input levels, headphones, overdubs and mixing in the same session with all your insert plug-ins.

The Red 16Line has 16 line inputs in D-sub format, associated with 16 line outputs and 2 main outputs (monitor). The 2 digitally controlled mic preamps deliver up to 63dB of ultra-clean gain, with stereo "link", individual phantom power, high pass filter, polarity and Air mode, the classic Transformer sound signature of Focusrite ISA Preamps. With a 2-port Dante card, you'll be able to expand your studio over Ethernet for more channels at higher sample rates, anywhere in your network, at low latency and at lower cost.

Features :

• Pro Tools HD Connections
• Dante audio network connectors
• Max resolution: 24 bit / 192 kHz
• AD converter with 118 dB dynamic range
• DA converter with 121 dB dynamic range
• 2 Red Evolution digitally controlled mic preamps with up to 63dB gain, high-pass filter, phase inversion and switchable +48V phantom power
• 3 OLED screens
• 19" - 1U rack format
• Dimensions (WxHxD): 483 x 44 x 340 mm
• Weight: 5.04kg
• Comes with Focusrite mixer and controls software plus compatible EQ and compressor plug-ins
• AAX/AU/VST Red 2 and Red 3 EQ and Red 3

Connections:

• 2x XLR mic inputs
• 2x 6.3 mm jack instrument inputs
• 16x Sub-D 25 line inputs
• 16x Sub-D25 line outputs
• 2x monitor outputs: 6.3 mm jack
• 2x ADAT inputs and outputs
• Coaxial S/PDIF input and output
• Synchronization of the input and output of the clock and loop BNC Word Clock
• 2x DANTE connectors
• 2x Thunderbolt 3 connections
• 2x 6.3mm jack stereo headphone plugs
• 2 x Mini DigiLink plugs