Connector:

2.54 DuPont head

DIN1.5 connector

 

passageway

Single hat without electrode and ear clip

Including 8 sets of electrode film group double-ear clip

Including 16 sets of electrode film group double-ear clip

Including 20 sets of electrode film group double-ear clip

 

 

Interface type:

 

The interface is divided into 2.54 DuPont female connector and PIN1.5 connector, which can be selected as required

 

Ear clip electrode:

 

Parameter

 

Material: high-performance nylon (high structural strength)

 

Electrode: gold-plated electrode

 

Surface treatment: frosted anti-slip

 

Wire: high-quality flexible silicone wire

 

Molding technology: the nylon frame is integrally molded, and there are no other metal components except the electrode and spring, which is durable

 

 

 

 

New EEG electrode cap, optional with gold-plated electrode ear clip x2, and electrode module of silicone ultra-soft wire (optional 8~20 groups), flexible configuration, multiple positions can be randomly configured, and the electrode module can be buckled into the corresponding buckle hole (>60) (the common cap buckle hole position is fixed, and the position can not be set according to the demand), and the tightness can be adjusted, Firmly cling to the scalp (common hats can be large/medium/small at most, but the head shape of different people is very different, which is difficult to maintain the tightness of each head area)

 

 

. Vertical adjustment is to adjust the horizontal spacing

Note: We have provided a vertical elastic belt and connected it with plastic components wrapped around the electrode head, as shown in the figure below

 

 

. Forward and backward adjustment

The fore and aft adjustment is mainly to avoid the feeling that the cap always moves backwards. It can be corrected by adjusting the length of elastic band on the cheek, as shown in the red arrow direction below, and the blue arrow indicates the direction of the cap that can be corrected