Package Included :
1pc straight grain Knurling Knife+ 6pcs(0.6mm+1.0mm+1.5mm straight grain Wheels)
Feature:
The knurling knife is made of high-quality 40Cr material, and the hardness of the chuck is HRC53-58°
Realize continuous turning cycle, greatly improve machining efficiency
Clamping for easy automatic adjustment
Knurling wheel hardness: between 58°-61°
Suitable for processing No. 45 steel, iron, aluminum alloy, copper, plastic, etc.
About Knurling
·At present, the drawing marking of knurling is correct according to the national standard.
However, most of the tools sold in the market are represented by P value.
After verification with the supplier, the knurled tools are as follows:
P=0.4、0.5、.0.6、0.8、1.0、1.2、1.5、1.6、1.8、2.0
·Now it is stipulated that the corresponding relationship between the modulus m value marked
on the drawing and the tool is implemented in the following table. Please know.At the same time,
the engineer is suggested to select the modulus according to the recommended outer diameter
value in the design.
·In addition, reticulated knurling is not recommended for stainless steel, POM, etc.
Description of M module model: M represents module
For example: M0 3 * 3.1415 = 0.942mm, optional knurling cutter P of 1.0 represents pitch, and so on
Advantages and working principle
·It is suitable for knurling processing of thin-walled workpieces
·The processed flower pattern is of excellent quality, and the flower surface is smooth and uniform
·The knurled pattern has high fineness
·The processing range is limited and cannot be processed in full size
·Only straight reticulated patterns can be processed
·The tool can only move axially on a cylindrical workpiece
·The tool can only start machining from the starting end of the workpiece,When machining from
the middle of the workpiece, the groove must be cut before machining
·The tool needs to be set and adjusted accurately, otherwise the perfect effect cannot be achieved
Fine polishing, fine luster
The surface of the tool body is polished with imported diamond, which makes
the surface of the tool body fine and glossy.
Clamp turning tool
The Clamp type makes the insert not easy to loosen and more firm.
High quality tool body
The cutter bar is made of high-quality 40CrMo material, with good antiseismic
and more wear-resistant.