9005+9006 LED HEADLIGHT BULBS CONVERSION KIT
Replace High Beam+Low Beam
80w/set,6000lm/set,CSP led chips
Replace High Beam+Low Beam
80w/set,6000lm/set,CSP led chips
Description:
--CSP LED headlights: Imported CSP chips,high optical density & low heat resistance,enhance light efficiency up to 95%. brilliant pure white lighting.Without ballast.
--Fan cooling：Built-In Cooling Fans ,Smart Efficient Cooling System Fast Heat Dissipation
--Rain-Resistant: Better works on rainy days and even in the harsh conditions.
--CSP LED headlights: Imported CSP chips,high optical density & low heat resistance,enhance light efficiency up to 95%. brilliant pure white lighting.Without ballast.
--Fan cooling：Built-In Cooling Fans ,Smart Efficient Cooling System Fast Heat Dissipation
--Rain-Resistant: Better works on rainy days and even in the harsh conditions.
Features:
Available Single Beam Bulb size: 9005/HB3;9006/HB4 (Replace high beam or low beam)
Power: 160W/set(80W/bulb)
LED Quantity: 6Pcs / 12Pcs CSP LED Chips (each bulb)
Luminous Flux: approx.8000lm/set(4000lm/bulb)
Operating Voltage: DC 9-32V (fit 12V/24V vehicle)
Color Temperature: Cool White 6000K
Material: Aviation 6063 Aluminum Profile
Operating Temperature: -40-80 Degree Celsius
Waterproof rate: IP67 Water and Dust Seal
Life time: Above 30,000 hours
Warranty:5 years
Available Single Beam Bulb size: 9005/HB3;9006/HB4 (Replace high beam or low beam)
Power: 160W/set(80W/bulb)
LED Quantity: 6Pcs / 12Pcs CSP LED Chips (each bulb)
Luminous Flux: approx.8000lm/set(4000lm/bulb)
Operating Voltage: DC 9-32V (fit 12V/24V vehicle)
Color Temperature: Cool White 6000K
Material: Aviation 6063 Aluminum Profile
Operating Temperature: -40-80 Degree Celsius
Waterproof rate: IP67 Water and Dust Seal
Life time: Above 30,000 hours
Warranty:5 years
Package includes:
4pcs LED Headlight Bulbs
New and old packaging will be shipped randomly
4pcs LED Headlight Bulbs
New and old packaging will be shipped randomly
Notice :
(1)These led headlight bulbs kit only replace Factory Halogen bulbs, they won't replace Factory HID bulbs.
(2)9005/HB3 led bulbs also can replace Fog Light 9145 9140 H10,but before replacing,will need to do a little modification on the retainer holder of led bulbs,then can twist to lock the bulb into place.
(3)9006/HB4 led bulbs also can replace single beam 9012.
(4)This LED bulb 880/H1 is NOT fully plug & play for some vehicles,some modification may be needed,need connect them to factory positive and negative to get power.(or contact seller )
(5)For some vehicle,such as Mazda, BMW, Dodge,Hyundai,Kia, etc, will need extra H7-retainer ring/holder to install the H7 led headlight bulbs on headlight housing.
(6)9004/9007 led headlight bulbs are plug and play for most vehicles, but for some other vehicles, if they have original locking ring(adapter) for 9004/9007 halogen bulb,they may need to modify the original locking ring(adapter) to lock the 9004/9007 led headlight bulbs on headlight housing, if you have this issure, please contact us for help.
(2)9005/HB3 led bulbs also can replace Fog Light 9145 9140 H10,but before replacing,will need to do a little modification on the retainer holder of led bulbs,then can twist to lock the bulb into place.
(3)9006/HB4 led bulbs also can replace single beam 9012.
(4)This LED bulb 880/H1 is NOT fully plug & play for some vehicles,some modification may be needed,need connect them to factory positive and negative to get power.(or contact seller )
(5)For some vehicle,such as Mazda, BMW, Dodge,Hyundai,Kia, etc, will need extra H7-retainer ring/holder to install the H7 led headlight bulbs on headlight housing.
(6)9004/9007 led headlight bulbs are plug and play for most vehicles, but for some other vehicles, if they have original locking ring(adapter) for 9004/9007 halogen bulb,they may need to modify the original locking ring(adapter) to lock the 9004/9007 led headlight bulbs on headlight housing, if you have this issure, please contact us for help.
Q1. Will these led bulbs fit for my car?
The "Compatibility" table on Ebay may not be 100% accurate or up to date.
If you don't know the part number of your existing bulb,Please follow below steps to match correct led bulbs before purchase to avoid mistake.
(1)Go to "https://www.rockauto.com/" website, find the part number of stock bulb on your vehicle.
(2)Take a look in your vehicle handbook or Take out your existing bulb from your vehicle,verify the part number of the bulb,match the part number on our listing.
(3)Please contact us via eBay message to tell us your vehicle information(Make,Model and Year),then we will help match right bulb.
The "Compatibility" table on Ebay may not be 100% accurate or up to date.
If you don't know the part number of your existing bulb,Please follow below steps to match correct led bulbs before purchase to avoid mistake.
(1)Go to "https://www.rockauto.com/" website, find the part number of stock bulb on your vehicle.
(2)Take a look in your vehicle handbook or Take out your existing bulb from your vehicle,verify the part number of the bulb,match the part number on our listing.
(3)Please contact us via eBay message to tell us your vehicle information(Make,Model and Year),then we will help match right bulb.
Q2:How to install these led bulbs and get good pattern?
A:Should be installed vertical, and the diodes are at 9 and 3 o'clock position.
(about 9007/H4/H13 hi-lo beam led bulbs,the high beam is at the bottom,the low beam is at the top)
Each car's headlamp reflector is different ,so for some vehicle,9004/9007/H4/H13 led bulbs will need adjust the angle to get the good pattern. first let the headlight shines toward the wall,remove the screws from the bracket and install the led bulbs into the headlight housing and turn the bulb slowly to find the best pattern,then twist back the screws of LED bulb's bracket to fix.Sometimes after finding the best angle,maybe you will need to drill a new hole manually to fix.
A:Should be installed vertical, and the diodes are at 9 and 3 o'clock position.
(about 9007/H4/H13 hi-lo beam led bulbs,the high beam is at the bottom,the low beam is at the top)
Each car's headlamp reflector is different ,so for some vehicle,9004/9007/H4/H13 led bulbs will need adjust the angle to get the good pattern. first let the headlight shines toward the wall,remove the screws from the bracket and install the led bulbs into the headlight housing and turn the bulb slowly to find the best pattern,then twist back the screws of LED bulb's bracket to fix.Sometimes after finding the best angle,maybe you will need to drill a new hole manually to fix.
Q3:After installing, why neither side led bulbs turn on or lighting up? or both sides led bulbs are flickering ? or have error code on car computer?
A: (1)First,Polarity Problem.unlike halogen bulbs, LED are polarity sensitive.Different car manufactures have different polarity setup,if led bullbs don't turn on or lighting up, Pls check for a polarity mismatch,disconnect the bulb and flip the socket in order to reverse the polarity to install.
(2)Second,Compatible Problem(Voltage Problem).the vehicle's computer system is sensitive to the led headlight bulb (the power of the led headlight bulb is lower than the halogen ones). Therefore,it may be occur compatible problem(flickering,error code,radio interference,headlamp fog light interference,high beam and low beam interference,etc), after replacing the led headlight on some vehicle,e.g. Mercedes, Ford, Volvo, Jeep Dodge and Ram etc, then will need to add resistor/decoders to solve these compatible problems.
A: (1)First,Polarity Problem.unlike halogen bulbs, LED are polarity sensitive.Different car manufactures have different polarity setup,if led bullbs don't turn on or lighting up, Pls check for a polarity mismatch,disconnect the bulb and flip the socket in order to reverse the polarity to install.
(2)Second,Compatible Problem(Voltage Problem).the vehicle's computer system is sensitive to the led headlight bulb (the power of the led headlight bulb is lower than the halogen ones). Therefore,it may be occur compatible problem(flickering,error code,radio interference,headlamp fog light interference,high beam and low beam interference,etc), after replacing the led headlight on some vehicle,e.g. Mercedes, Ford, Volvo, Jeep Dodge and Ram etc, then will need to add resistor/decoders to solve these compatible problems.