1 Rolle zu 2500 Stück nanoLOC NLSG0501A
Zustand: original verschweißt
Datecode: verschiedene Wochen aus 2019
Details zum nanoLOC TRX:
High Performance RF Transceiver
Enabling Location Awareness
Highly Integrated Solution with Ranging
The nanoLOC TRX Transceiver is a highly integrated mixed
signal chip utilizing Nanotron?s unique wireless communication
technology CSS (Chirp Spread Spectrum).
With its unique ranging capability, nanoLOC can measure
the link distance between two nodes. Thus, nanoLOC supports
location-aware applications including Location Based
Services (LBS), enhanced RFID, as well as asset tracking
(2D/3D RTLS). As ranging is performed during regular data
communication, additional infrastructure, power, and/or
bandwidth is not required.
Improved Coexistence Performance
nanoLOC supports a freely adjustable center frequency with
3 non-overlapping frequency channels. This provides support
for multiple physically independent networks and improved
coexistence performance with existing 2.4 GHz
wireless technologies.
Data rates are selectable from 2 Mbps to 125 kbps. Due to
the chip?s unique chirp pulse, adjustment of the antenna is
not critical. This significantly simplifies the system?s installation
and maintenance (?pick and place?).
A sophisticated MAC controller with CSMA/CA and TDMA
support is included, as is Forward Error Correction (FEC)
and 128 bit hardware encryption. To minimize software and
microcontroller requirements, nanoLOC also provides
scrambling, automatic address matching, and packet
retransmission.
Key Features
+ Single chip 2.4 GHz RF Transceiver operating in the
worldwide ISM Band
+ Integrated MAC controller with FEC and CRC checking
+ Automatic retransmission and acknowledgement, as
well as automatic address matching
+ Few external components required
+ Link distance estimation with built-in ranging capability
0 High precision ranging.. 2 m indoors / 1 m outdoors
+ Low current consumption:
0 Current consumption RX starts at .................33 mA
0 Current consumption TX.................30 mA @ 0dBm
0 Standby current with active RTC ...................1.2 ?A
0 Low supply voltage .................................2.3 ? 2.7 V
+ Modulation ...................Chirp Spread Spectrum (CSS)
+ Media Access Techniques
0 FDMA .........................3 non-overlapping channels
0 CSMA/CA
0 TDMA
+ Programmable data rates..............2 Mbps to 125 kbps
+ Clock available for external ?C .................. 32.768 kHz
+ Integrated fast SPI interface .......................... 32 Mbps
+ Programmable output power............ -33 dBm ? 0 dBm
+ External power amplifier supported
+ Receiver sensitivity ................................up to -97 dBm
+ RSSI sensitivity ...............................................-95 dBm
+ In-band C/I ..............3 dB @ 250 kbps & C = -80 dBm
+ Industrial temperature range..............-40 °C to +85 °C
Jammer, Störsender