Fresh Water Pump 12V DC 70W 130 PSI Self Priming Pump for Boat/Marine/RV/Yacht
Ship within 24 hours.
100% New & Excellent Quality
Strictly QC, Each item was fully checked before shipping
FREE & FAST Shipping delivery with Tracking Number
Strictly QC, Each item was fully checked before shipping
FREE & FAST Shipping delivery with Tracking Number
This 12 volt DC diaphragm self-priming sprayer is a multi-purpose water pump, can be used for Garden and sprinklers, showers, water taps in the boat, caravan, travel trailers, RV or home motor. It is great for a Caravan, Camper, RV, Boat, Marine, Home Garden and Camping.
Description:
Easy to install.
Runs dry without system.
Easy connecting system.
Totally sealed, high stable pressure.
Self priming, silent running, low power consumption.
Motor duty cycle will vary with load and ambient temperature.
Applications: Car washing machine, the solar energy water, remote control water equipment, some place need to control the switch frequently, somewhere energy saving, etc.
Note:
This item has built-in test water pressure switch. Water pressure is generally adjusted by the size of the nozzle flow. The adjustable range is 0 to 0.9 mpa. In front of the pump head, there are two lines, which can connect a micro switch to control the water pressure. You need to install this switch by yourself according to your requirements. Connected water inlet pipe length: on the ground 3.5 meters, height 2 meters. This has much to do with your operation.
Specification:
Volts: DC12V
Power (max): 70W
Input water pressure: 0.2Mpa
Max Output water pressure: 0.9Mpa
Pressure setting: 130PSI(Max)(can be adjusted from 75PSI to 130PSI if needed)
Largest Flow: 6L/min
Protection Valve Type: intelligent valve (with Pressure switch)
The absorption process: 2.5 meters
Head: 90 meters (water diversion length of pipe)
Range: 9 meters
Dimension: 16.5cm(L) x 9.6cm(W) x 6cm(H)
Package including:
1 x Diaphragm Water Self Priming Pump
Description:
Easy to install.
Runs dry without system.
Easy connecting system.
Totally sealed, high stable pressure.
Self priming, silent running, low power consumption.
Motor duty cycle will vary with load and ambient temperature.
Applications: Car washing machine, the solar energy water, remote control water equipment, some place need to control the switch frequently, somewhere energy saving, etc.
Note:
This item has built-in test water pressure switch. Water pressure is generally adjusted by the size of the nozzle flow. The adjustable range is 0 to 0.9 mpa. In front of the pump head, there are two lines, which can connect a micro switch to control the water pressure. You need to install this switch by yourself according to your requirements. Connected water inlet pipe length: on the ground 3.5 meters, height 2 meters. This has much to do with your operation.
Specification:
Volts: DC12V
Power (max): 70W
Input water pressure: 0.2Mpa
Max Output water pressure: 0.9Mpa
Pressure setting: 130PSI(Max)(can be adjusted from 75PSI to 130PSI if needed)
Largest Flow: 6L/min
Protection Valve Type: intelligent valve (with Pressure switch)
The absorption process: 2.5 meters
Head: 90 meters (water diversion length of pipe)
Range: 9 meters
Dimension: 16.5cm(L) x 9.6cm(W) x 6cm(H)
Package including:
1 x Diaphragm Water Self Priming Pump
