Mercedes A Class Dash Vinyl Decal AMG A45S Edition 1 Style Like OEM

Fits all A class dash trims of the current generation 2018+

*FREE 1st CLASS POSTAGE*

This listing is for 1 singular decal, Please add a note in the box with the highlight colour you require.

LHD also available.

This is printed decal meaning it is one piece of flat vinyl, it is supplied as one piece for easy install, there are no overlapping no edges or raised areas like some others available.

This is a professional grade product, made and produced in-house in the UK on premium, high quality 3M air-release vinyl. Supplied with application tape for easy application.

To apply simply line up the top edge with the ambient lighting strip. Further guidance available below.

Decal can last up-to 7 years with proper application and care.

Colours

Red 

Yellow

Petronas Green

Please note colours may differ slightly to colour in the photo due to difference in screen colour and resolution.

Shipping

All items are custom made to order, we aim to dispatch the same day on orders placed before 10am. If your order is placed after this time, dispatch will be the next working day. Postage is 1-2 days through Royal Mail 1st Class tracked. 

Application Guidance

We recommend professional installation as we cannot accept responsibility for any issues arising due to installation/application error by the purchaser.

Carefully inspect your decal kit before application. Please contact us if any defects are detected and do not use the film, as we cannot process refunds for defects once the material has been used in any way. We check all products before they are posted to ensure quality control.

• Clean all surfaces to which the film is to be applied with a specialist pre-wrap surface cleaner. Do not use spirits. Make sure that any remaining detergents are thoroughly and completely removed.

• The car must be completely clean and dry when applying the film.

• Only apply in temperatures > +15° C

• Carefully remove all elements that obstruct the application (e.g. outside mirrors, door handles, trims, windscreen wipers etc.).

• Inspect all surfaces and edges for residual preservation wax or polish. Any residues must only be removed with a silicone-free citrus-based industrial detergent. Surfaces with more stubborn stains can be cleaned additionally with a commercially available insect or tar remover.

• Never apply detergents that use nanotechnology to establish nano-sealing or nano-coating on the surface to be cleaned. Please observe the manufacturer's instructions.

• Make sure that the surfaces, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals.

• Only install using specialist tools designed for vinyl wrap installation. Never use a squeegee without a felt pad, as this can cause scratching to the high gloss/satin laminate. 

• Ensure you are working in a clean, dry and dust free environment.

• Line up the decal while backing paper is still on the decal to ensure it is level and correctly placed.

• Remove one side of decal from the backing paper and work from one side to avoid creasing and air bubbles.

• Use a squeegee to smooth the decal onto the paintwork while removing the backing paper.

• Once applied remove the overlaid application tape carefully and slowly.

• Post heat to no more than 93 degrees Celsius.

Please note if paintwork is rusty or damaged prior to application this will show through the vinyl and the decal may remove the paintwork on removal if not in good condition prior to application.