Product Description

If you have any questions, please contact customer service first, do not open disputes easily, thank you!

Features:

This is a USB charging cable for Joy-Cons

It can be used to charge Joy-Cons through various USB-A ports

1.Directly use 5V/1A power supply,or USB charging port with load capacity≥1A

2.With charging and full indication function

Each handle corresponds to a set of red and green LED charging indicator

3.Support single handle charging or two handles charging at the same time

Each handle charging current in 200mA or so

4.Low voltage,over-voltage and over-current protection


Specification:

Power supply voltage range(Vdd):-0.3V~6.0V

Input voltage range(Vin):-0.3V~Vdd+0.3V

Operating Temperature:-20°C~+85°C

Storage Temperature:-40°C~+125°C

Operating Voltage:Minimum 2.4V Maximum 5.5 V


Function Description

1.Indicator light

Charging:red LED is on

Fully charged:green LED is on

Not charging:all LEDs are off

2.Over-current protection

For each charging port,the normal charging current is about 200mA

The maximum current allowed is 400mA,if it exceeds 400mA, the charging port will be overcurrent protected

If the current exceeds 400mA,the charging port will be overcurrent protected and charging will not be allowed

At the same time,the corresponding red LED will flash to indicate

Charging will be resumed after unplugging the handle

3.Low voltage over-voltage protection

When the power input voltage is greater than 5.6v,the charging cradle will enter over-voltage protection mode

2 red LEDs flash to allow charging

When the voltage decreases to below 5.3v,normal charging function will be resumed

When the power input voltage is less than 4.2v,the charging cradle enters the low voltage protection mode

2 red LEDs blink rapidly and charging is not allowed

When the voltage rises above 4.7v,normal charging function will be resumed

4.Full detection

When the charging current of the handle is less than 40mA for 5 seconds

The handle is considered to be fully charged and the green LED is on


Package includes:

1*For Joy-Con handle USB charging cable


Note:

Only include the above package products

Please allow 0-1cm error due to manual measurement

Please make sure you don't mind before bidding

Due to the difference between different monitors

Pictures may not reflect the actual color of the item.Thanks


About Us
We accept all payments authorized by eBay.