194823
Model
ACFAN00254A
Overview
P12 PWM PST
A-RGB 0dB
Semi-passive
120 mm case fan with A-RGB.
A-RGB for
Full Colour Control
The P12 PWM
PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be
controlled independently of each other and are compatible with the common A-RGB
standards of leading motherboard manufacturers. The fan can thus be fully
illuminated directly via the A-RGB mainboard connector or via an external
controller and synchronised with the illumination of other hardware.
0 dB Mode -
Zero RPM
The speed
of the fan can be throttled down to standstill via PWM. This allows silent
operation in IDLE and at the same time guarantees maximum performance when
required.
Maximum
Smoothness, Minimum Vibration
The
operating noise of the newly developed ARCTIC motor is barely perceptible even
at the lowest speed. In addition, the P12 PWM PST A-RGB 0dB has rubberised
contact surfaces and thus reduces audible vibrations to a minimum.
Optimised
for High Static Pressure
The P12 PWM
PST A-RGB 0dB operates with a focused airflow and a high static pressure. The
fan thus guarantees extremely efficient cooling, even with increased air
resistance, and is therefore suitable for use on heat sinks, radiators and
filters.
0 to 2000
RPM Controlled via PWM PST
With a wide
speed range and the innovative PWM Sharing Technology (PST), the fan speed of
the P12 PWM PST A-RGB 0dB can be controlled synchronously with all other fans.
This reduces noise to a minimum while guaranteeing maximum cooling performance.
High
Quality Bearing
Thanks to
an alloy/lubricant combination developed in Germany, friction within the
bearing is reduced and greater efficiency is achieved. In this way, less heat
develops, less bearing noise is generated and the service life of the fan is
extended.
Performance
Fan Speed
0 - 2000
rpm
Airflow
48.8 CFM/
82.91 m³/h
Static
Pressure
1.85 mm H₂O
Noise Level
0.3 Sone
Operating
Ambient Temperature
0 - 40 °C
Fan
Fan Frame
Standard
Control
Type
PWM PST
Connector
4-Pin-Connector
+ 4-Pin-Socket
Fan Bearing
Fluid Dynamic
Bearing
Electric
Characteristics
Typical
Voltage
12 V DC
Starting
Voltage
5 V
Current/
Voltage
0.11 A/ 12
V
Cable
Length
400 mm
Size &
Weight
Length
120 mm
Width
120 mm
Height
25 mm
Weight
131 g