231537
Model
P8 PWM PST
Overview
OPTIMISED
FOR STATIC PRESSURE
During the
development of the new P8 PWM PST, special emphasis was placed on a focused
airstream and thus a high static pressure. The fan guarantees extremely
efficient cooling, even with increased air resistance. Therefore, the P8 PWM
PST is particularly suitable for use on heatsinks and radiators.
MORE
EFFICIENT TECHNOLOGY
The motor
is driven by a latest-generation PWM IC, which enables the new P8 PWM PST to
operate much more efficiently than its predecessors. This saves energy without
compromising performance.
MAXIMUM
QUIETNESS, MINIMUM VIBRATION
Even at low
speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to
a sinus-magnetizing the new motor only creates about 5 % of the vibration from
commutation of a regular DC-motor without filter. Consequently, there is no
need for rubber spacers due to the steady and smooth torque of the new motor.
200 TO 3000
RPM REGULATED VIA PWM PST
Thanks to
the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In
this way, noise is kept at a minimum while maximum cooling performance is
guaranteed when needed.
HIGH
QUALITY BEARING
Thanks to
an alloy/lubricant combination developed in Germany, friction within the
bearing is reduced and greater efficiency is achieved. As a result, there is less
heat development as well as less bearing noise, which means you can enjoy a
longer service life from your fan.
TWO WAY
INSTALLATION
Push warm
air out of the case
Pull cool
air into your case
Performance
Fan Speed
200 - 3000
rpm
Airflow
23.4 CFM /
40.3 m³/h
Static
Pressure
1.9 mm H₂O
Noise Level
0.3 Sone
Fan
Fan Frame
Standard
Control
Type
PWM PST
Connector
4-Pin-Connector
+ 4-Pin-Socket
Fan Bearing
Fluid
Dynamic Bearing
Operating
Ambient Temperature
0 - 40 °C
Electric
Characteristics
Typical
Voltage
12 V DC
Starting
Voltage
3.4 V
Current/
Voltage
0.09 A / 12
V
Cable
Length
400 mm
Size &
Weight
Length
80 mm
Width
80 mm
Height
25 mm
Weight
81 g