Note
new in bulk packing
the item will has slight scratches on the surface due to transportation and storage,not come with instructions or maintenanceļ¼please understand.
Features
Easily expand your wired and wireless network
This starter kit contains everything you need to turn every power socket into a possible wired or wireless network connection by extending your existing wireless network using the electrical wiring in your home.
High-speed data streaming
Wireless N standard, up to 300 Mbps³ wireless speeds and backwards compatible with Wireless G up to 500 Mbps³ data transfer rates over the existing electrical wiring.
Secure network sharing
Simple push-button set up with sophisticated data encryption to secure your network from unwanted connections
Plug and Play
Truly ‘plug and play’, no need for any IT or networking skills
Connectivity
10/100 Mbps Fast Ethernet LAN port to connect a wired device for high-speed activities
Compatible with
PowerLine interface compatible with IEEE 1901 and HomePlug AV devices. IEEE 802.11n, backward-compatible with 802.11g/b
Security
• IPv6 support
• Web browser setup and configuration
• One-touch AP configuration
Functions & Features
|
Device Interfaces
|
• 10/100 Fast Ethernet LAN port with auto MDI/MDIX
• 802.11nWLAN
• Common Connect button
• PowerON/OFF switch
• Reset button
|
Wireless LAN
|
• 802.11n/g/b
• 802.11n speeds of up to 300 Mbps2
• WPA/WPA2 (Wi-Fi Protected Access)
• 64/128-bitWEP data encryption
|
PowerLine
|
• HomePlug AV
• IEEE1901
• Transferspeeds up to 500 Mbps3
|
Advanced Features
|
• IPv6 support
• Power-saving
• Wi-FiWMM Quality of Service
• Multicast over unicasttechnology
• PowerLineQoS
|
Dimensions
|
• 90 x 65 x 50 mm (3.54 x 2.56 x 1.97 inches)
|
Power input
|
• 100V to 240V AC, 50/60 Hz
|
Power consumption
|
• 6 watts
|
Temperature
|
• Operating: 0 to 40 °C (32 to 104 °F)
|
Humidity
|
• Operating: 10% to 90% non-condensing
|
Certifications
|
• CE/LVD
• FCC
• UL
• RoHS
• HomePlug AV
• IPv6
|
Advice
If you have not previously secured your existing Powerline network, you will need to set up security for all of your existing Powerline devices. Perform the following steps for each device: press the Common Connect Button on the DHP-W310AV, then press the Simple Connect Button on your existing Powerline device within 2 minutes.
Include
DHP-W310AV powerline adapter*1
DHP-308AV powerline adapter*1