https://youtu.be/XluHk_lRNI4
Note
Brand new
The outer packing box may be slightly squeezed due to transportation and storage. Please understand.
The outer packing box may be slightly squeezed due to transportation and storage. Please understand.
Applicable model:
HTC VIVE Base Station
HTC VIVE PRO Base Station
* Composition of products: main engine sucker + acrylic case
* Product material: 304 stainless steel strong magnet + acrylic
* Product Size and Weight:
* Product material: 304 stainless steel strong magnet + acrylic
* Product Size and Weight:
Host Sucker: 65*65*27mm 100g
Acrylic case: 85*22*120mm 50g
Acrylic case: 85*22*120mm 50g
Product Principle:
Vacuum Pressure Principle and High Magnetism Suction Principle
Product use:
Used to fix HTC base station on the wall, making the use and movement of base station more convenient. (It can also be used with other products of our company, so that different functions can be realized. Other products need to be purchased separately.)
product characteristics:
1. HTC base station dedicated, can be quickly installed and disassembled, without drilling, traceless installation, solid and stable.
2. The position of the product on the wall can support random movement and change.
3. So this product can be used on smooth and seamless walls.
4. The load-bearing capacity of the product is as high as 5 kg (after precise load-bearing test).
5. The main engine sucker can be reused more than 200 times after cleaning with clean water.
1. HTC base station dedicated, can be quickly installed and disassembled, without drilling, traceless installation, solid and stable.
2. The position of the product on the wall can support random movement and change.
3. So this product can be used on smooth and seamless walls.
4. The load-bearing capacity of the product is as high as 5 kg (after precise load-bearing test).
5. The main engine sucker can be reused more than 200 times after cleaning with clean water.
Installation methods of products:
1. Fixed main engine sucker. Put the main sucker on the wall, rotate the fuselage clockwise, and exhaust the air from the contact surface to achieve the effect that the contact surface is vacuum. The main sucker and the wall are completely fixed together.
2. Put the case on the main suction cup. Because of the principle of magnetic force, the iron sheet in the case and the magnet on the main machine will be firmly adsorbed together.
3. Fixed base station location. Using the special screw provided by our company, we fix the base station bracket directly on the two holes of the outer shell, and finally fix the base station on the wall.
Cautions for product use:
1. Before use, the walls that need to be installed should be thoroughly cleaned. There should be no dust or moisture, and make sure walls are thoroughly clean and dry.
2. Tear off the protective film of the main engine suction cup, press the suction cup to the wall which needs to be installed, and press the suction cup hard.
Heart, squeeze out the absorbed air, twist the sucker shell clockwise, until the sound of "click" is heard, the vacuum state of the sucker represents the completion of installation.
3. If you need to change the fixed position, please rotate the round shell of the suction cup counterclockwise. When the gap between the suction cup and the metal part becomes larger and the small ears of the suction cup are pulled up, the suction cup will easily break away from the adsorption surface.
4. If the main engine sucker can not be firmly fixed on the wall, please remove the main engine sucker and clean it with clean water and dry it directly before reusing.
5. Scope of application: ground glass, ceramic tile, antique brick wall, stainless steel drawing, paint wood finish, refrigerator door, acrylic board, metal, plastic, artificial marble, aluminum-plastic board, cabinet and all other seamless surfaces.
6. Not applicable scope: lime wall, wallpaper wall, natural marble and other permeable wall.
1. Fixed main engine sucker. Put the main sucker on the wall, rotate the fuselage clockwise, and exhaust the air from the contact surface to achieve the effect that the contact surface is vacuum. The main sucker and the wall are completely fixed together.
2. Put the case on the main suction cup. Because of the principle of magnetic force, the iron sheet in the case and the magnet on the main machine will be firmly adsorbed together.
3. Fixed base station location. Using the special screw provided by our company, we fix the base station bracket directly on the two holes of the outer shell, and finally fix the base station on the wall.
Cautions for product use:
1. Before use, the walls that need to be installed should be thoroughly cleaned. There should be no dust or moisture, and make sure walls are thoroughly clean and dry.
2. Tear off the protective film of the main engine suction cup, press the suction cup to the wall which needs to be installed, and press the suction cup hard.
Heart, squeeze out the absorbed air, twist the sucker shell clockwise, until the sound of "click" is heard, the vacuum state of the sucker represents the completion of installation.
3. If you need to change the fixed position, please rotate the round shell of the suction cup counterclockwise. When the gap between the suction cup and the metal part becomes larger and the small ears of the suction cup are pulled up, the suction cup will easily break away from the adsorption surface.
4. If the main engine sucker can not be firmly fixed on the wall, please remove the main engine sucker and clean it with clean water and dry it directly before reusing.
5. Scope of application: ground glass, ceramic tile, antique brick wall, stainless steel drawing, paint wood finish, refrigerator door, acrylic board, metal, plastic, artificial marble, aluminum-plastic board, cabinet and all other seamless surfaces.
6. Not applicable scope: lime wall, wallpaper wall, natural marble and other permeable wall.