- Including 2 x Hoses, 2 x Male Couplers with dust cover, 2 x Fittings , 2 x Washers. Hose Length : 29,5" . The male quick couplers are 1/2" BSP Poppet Style.
- Recomended For Tractors 90-210 HP range. The push force is 20300 Pounds and pull force is 15200 Pounds at pressure 2610 PSI
- It is a Category 3 hydraulic Toplink. The eyes are 1-1/4"
Description:
The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this - an unbeatable combination in combination with the integrated locking block *.
* When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor's control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted.
Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + union
Hose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330
Operating pressure: 180 bar
Length: 75 cm