Description:
Package Included:
6pcs/set (as shown in the picture)
Installation method:
1. Clean the mounting location with rubbing alcohol before continuing. (make sure to remove any grease, wax or dust etc.)
2.
Please make sure the product fits perfectly before installation. (Note:
If you have any questions or the product is not suitable, please
contact us)
3. Remove the high-strength double-sided tape on the back
of the board. In relatively low temperatures, heat the installation
location and use a hair dryer or heat gun on a low setting
4.
Carefully place the product in the desired position and press for about
1-2 minutes, (Note: Do not wash the car within 24 hours. The adhesive
should cure after 12 hours)