Oyaide MCS-CF Multiple Cartridge Spacer 3Set Carbon Fiber Reinforced New

Description

Brand New Unopened.
Product overview of Oyaide MCS-CF
Revolutionary multiple cartridge spacer

Has there ever been a cartridge spacer this flexible? “MCS-CF” is an innovative multiple cartridge spacer with a 6-step height adjustment function. The material is carbon F R P, which has been proven in H S - C F. Set of 3 pieces, 1 piece each with thickness 0.5mm/1.0mm/1.5mm. The height can be adjusted in 6 steps in 0.5mm increments, from a minimum of 0.5mm to a maximum of 3.0mm, either individually or by stacking them on top of each other. The contact area with the cartridge is 19mm x 23mm, which is a generous area. Domestic models include the DECCA and SHURE M97 series, which have a small contact surface, the average-sized Audio-technica AT33 series, the DENON DL103 series and Ortfon MC20/30 series, which have a large contact surface, and even OrtfonKontrapunkt/CADNEZA/Jubilee, which have a circular contact surface. Compatible with all external cartridges*.

*Cartridges such as the Ortfon SPU/Concorde series and EMT TSD series that are directly attached to a dynamic tone arm without a shell are not eligible.
Height adjustable in 6 steps from 0.5 to 3.0 mm in 0.5 mm increments

To accurately trace a record, the tone arm must be set parallel to the record surface while the stylus tip contacts the record surface with the appropriate stylus pressure (stylus pressure adjustment and zero balance adjustment). However, the height from the top of the cartridge to the tip of the needle differs depending on the product. Previously, it was necessary to adjust the height of the arm each time the cartridge was replaced, but this work was extremely nerve-wracking, and adjustments of less than 1 mm were extremely difficult. Additionally, with some record players, the tone arm did not lower to the desired position, making it impossible to use short cartridges in ideal settings. If you use "MCS-CF", you can adjust the height in 6 steps from 0.5 to 3.0 mm in 0.5 mm increments to perfectly fit the cartridge stylus tip to the board surface. There is no need to adjust the tone arm height for each cartridge. By inserting the required number of "MCS-CF" between your cartridge and the head shell in advance, you can immediately use the cartridge with the best settings. After adjusting the height of the tone arm by setting the highest cartridge to the stylus tip, insert the “MCS-CF” according to the difference in height between each cartridge.
Made of lightweight carbon FRP

"MCS-CF" is made of lightweight carbon FRP, so it can be easily used with light stylus pressure cartridges and tone arms for lightweight cartridges without disturbing the weight balance like conventional metal spacers. “MCS-CF” uses high-speed vibration processing of carbon FRP to quickly eliminate unnecessary vibrations from the cartridge. Eliminates incidental noise caused by unnecessary vibrations and dramatically improves S/N. The full potential of the cartridge is brought out, and a clear sound image emerges as if the fog has cleared. “MCS-CF” combines flexible height adjustment function and sound quality improvement effect. This is the birth of an epoch-making cartridge spacer that overturns the conventional wisdom of analog products.
Oyaide Oyaide MCS-CF product specifications
Product specifications
Material: 1K plain weave carbon FRP
Dimensions: 19mm x23mm
Mass: 0.5mm/0.32g, 1.0mm/0.64g, 1.5mm/0.96g
Height adjustment: 6 levels in 0.5mm increments, from a minimum of 0.5mm to a maximum of 3.0mm.
Number of packages: 3 pieces each with a thickness of 0.5mm/1.0mm/1.5mm
Height pattern: 0.5mm/1.0mm/1.5mm/2.0mm (0.5mm+1.5mm)/2.5mm (1.0mm+1.5mm)