Y-15B Time Control Timer Board Power Supply for coin acceptor selector

Description

*Newest version of software!!

*This is used for power supply time control.

*Can be used with a coin acceptor or other devices that can

output pulse signals.and you can set up for what values to start your machine!!

*Suitable for any kinds of automatic control devices such as gaming machines,

massage chairs,shoe polishers,washing machines,chargers,dryers,and PCs.

Input Voltage	DC+12V
Standby	Display shows:00:00, rely: Normal Open (NO)
Accumulated time	Yes, add time if receive signals again when time is running
Max current load	15A
How it works
Mode 1	Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out
Mode 2 (Connect a button)	Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out
Pause (connect a button)	Push button pause: it cuts off power when pause, display shows remaining time.  Re-supply power after push button pause again
Operating Mode	Please reference to page 2
Connection Example	Please reference to page 2

 

---

Features

(1)Controls electrical devices ( TV, Massage chair..) power.

(2)Suitable for public place location and most of electric device control,

for example:PCs,washing machines,dryers,massage chairs,chargers,etc.

(3)AC 1250W/DC 500W electrical relay capacity.

(4)Digital timer: rate adjustable by owner through three simple push button switch.

(5)The time can be set by seconds or by minutes.

maximum time : there are 2 version of software

•99:00 (minutes:seconds) or •99:00 (hours:minutes)

(6)Control time by seconds-minutes or minutes-hours.

(7)Accumulate time when signal inputs.

(8)Timer control board with coin acceptor operates with 12V DC power.and has

the LED to show the Time left.

Setting:

Please follow CODE ON DISPLAY and use button "S1" and "S2" to set up number

• INPUT SIGNAL QUANTITY AND TIME

1. Please press button "S4". “B” flashes. Please set up INPUT SIGNAL QUANTITY to active device (01-50).
2. Please press button "S4", “A” flashes. Please set up TIME (01-99).
3. Please press button "S4", “B” flashes. Please set up TIME (01-99).
4. Please press button “S4” 4 TIMES.
5. Please set up TIME for Warning Sound.
6. Please press button "S4" to finish.

PAGE-2

• GIVEN TIME: Add time by free if input signals reach SETTING RATE during time is running.
  Example Setting: input signal to active device: 01, input signals for given time: 03 give time: 02:10
                 Add time “02:10” free if receive “3 signals” during time is running.

1. Please press button "S4" 4 TIMES. “B” flashes. Please set up RATE OF INPUT SIGNAL QUANTITY.
2. Please press button "S4", “A” flashes. Please set up GIVEN TIME.
3. Please press button "S4", “B” flashes. Please set up GIVEN TIME.
4. Please press button "S4" to finish.

• Mode Setting

Please follow table to set up operating function:

1. Please hold on button "S1" and "S2" simultaneously for 3 seconds to get into MODE SETTING.
2. Please use button "S1" and button "S2" to set up number for CODE
3. Please press button "S4" to switch to next code

Function	Code on Display		Description
	A	B
Running Time	01	01	Time runs down without pressing button
		02	Time runs down by pressing button
Time Type	02	03	MINUTE: SECOND
		04	HOUR: MINUTE
Memory	03	05	Yes: Remaining time keep running after power off and on
		06	No: Standby power off and on
Back to standby	04	1-30	user has no action after push buttons or receive signals in setting time
Default: 01-03: Bold and base line. 04: not use the function.

Specifications

The timer control board for any electrical load does not exceed the following:

•DC 30V,AC 250V,Current 7A

•DC 28V,AC 250V,Current 5A

•Size:91.0mm X 54.30mm

•Unit Ship Weight:0.25kg

The Package included:

(1) 1 X Timer Control Board

(2) 1 X Power wire and Signal wire

(3) 2 X Connect USB wires