Overview:

XProS TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system .e.g. camera flashes, outdoor flashes and studio flashes, but also can control the Sony original flashes when using in combination with X1R-S receiver .Featuring multi-channel triggering and stable signal transmission, this fiash trigger applies to hotshoe-mounted Sony series cameras.

Features:
Built-in Godox 2 4G Wirless X System versatile Using methods
Can as a Wireless Godox Flash Trigger/ Wireless Sony Camera Flash Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack
Support TTL Autoflash and Professional Functions
16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless Ids of the master and slave unit are set to the same, avoiding signal interference effectively
Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot &multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups output value simultaneously, etc
Outstanding Design, Easy Operation and Great Portability
Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation.
Support type-C USB firmware upgrade and wireless triggering by 2. 5mm sync cord jack.
XproS is quite portable for it only weighs 80g.

This flash trigger can be used on the following Sony series camera models:
a77lI  a77  a99  ILCE-6000L  a9  A7R  A7Rlll  a350  DSC-RX10

This flash trigger can be used to control the following flashes models:

Specifications:
Model:Xpro-S
Compatible cameras: Compatible cameras Sony series cameras(TTL autoflash) Support for the cameras that have PC sync socket..
Power supply: 2*AA batteries
TTL autoflash: Yes
Manual flash: Yes
Stroboscopic flash：Yes
High-speed sync：Yes
Second-curtain sync :Yes
Flash exposure compensation: Yes. ±3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting:The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function: Transform the TTL shooting value into the output value in the M node
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Memory function Settings will be stored 2 seconds after last operation and recover after a restart
Transmission range (approx.): 0-100m
Built-in wireless:2.4G
Modulation mode: MSK
Channel:32
Wireless ID: 01-99
Group:16
Display: Large LCD panel, backlighting ON or OFF
Dimension:90x58x50mm
Weight:80g

Contains:
1 x Godox XPro-S Wireless Flash Trigger