description
Suitable for daily cleaning
Remove dirt, dust, spills and grease from sealed granite, marble and other natural stone surfaces
Clean neat stripes free
Safely removes grease, dirt and watermarks without leaving streaks
Strong protection long lasting polish
Our ph balanced formula will keep your stone seal from deteriorating and keep your stone shine for a long time.
Good water resistance, no stain penetration
Form protective film after electroplating, the surface has impervious water repellent effect. Oil and stain resistant, easy to scrub.
Used to seal granite, marble, travertine, limestone, SLATE, tile and solid wood furniture...

Hint:
Before construction, it is necessary to clean the stains on the surface of the construction site, remove the wax and remove the oil before construction. Otherwise, the final effect may be affected.
Operation method
Clean the surface on site and keep dry;
Drop the crystal plating agent on the towel, apply it in small parts, and wait for natural drying after applying;
Can be used in superposition, repeat step 2, and superposition plating crystal to increase hardness (superposition interval needs more than half an hour);
Do not water within 24 hours after electroplating crystal, natural air drying can be transparent and bright;


norm
Composition: nano silicon
Usage area :1 bottle can be sprayed 35m
Capacity :100 ml
Product color: transparent
Shelf life :3 years (unopened)
Storage: Cool and dry place
Scope of application: widely used in stone, marble, quartz stone, ceramic tile and other products surface coating, forming a layer of crystal coating protective layer on the surface.
Package includes :1* Marble nanocrystal plating agent

preventive measure
Keep away from children and pets, from dust, and from eyes.
Indoor use only, sealed after use, this product with air oxidation curing.
Crystal plating on a towel or sponge, should be applied to the end, apply once is enough. If too thin, no shine, brush marks, if too thick, easy to peel. The construction of the new countertops also required polishing.
There should be no water in 5 days before crystallization and dry plating. If it comes into contact with water, it must be dried. Water can accumulate at a later stage.
For items with loose surfaces, they need to be used multiple times after drying.
Before the crystal plating project, please test on the small surface with not obvious edges and corners to ensure that glossiness, hardness and toughness meet the requirements before large-scale construction.