RUBBERcomp is a synthetic rubber coating manufactured by Maston Oy and launched in spring 2014. Nowadays RUBBERcomp is an extremely well-known product sold in over 30 countries as far away as Australia and Uruguay. In its home country of Finland,RUBBERcomp is the most well-known rubber coating and is known amongst the general public as rubber paint. Once dry, you can remove the rubber layer easily by peeling it off.” The RUBBERcomp® coating is anti-static and flexible, and forms a non-slip, secure coat.  RUBBERcomp® remains flexible for its entire service life and does not crack or become brittle even in extreme weather conditions.  The coating is tested and proven to work in temperatures ranging between -30°C and 90°C. We recommend applying at least 4 layers. You can use it to waterproof electric components or give products a new surface coating or colour that can simply be peeled off when you feel like a change. Once dry, simply peel away the rubber layer to remove it.  The potential applications for RUBBERcomp are almost endless.  Here are some examples of RUBBERcomp applications. RUBBERCOMP APPLICATIONS METAL Improved resistance to wear and tear, protection against corrosion, vibration dampening, noise reduction. WOOD Prevents water from penetrating wood and surface cracks. GLASS Improves shock resistance and prevents the spread of shards or fragments. TEXTILES AND ROPES Protects surfaces, prevents water penetration, forms protection against mould and protects against wear and tear. PLASTIC Forms a flexible, non-scratch layer. RUBBER Forms a flexible, non-scratch layer. PAPER Makes surfaces weatherproof and tear-resistant. PAINTING INSTRUCTIONS - RUBBERCOMP SPRAY Ensure that the area in which you intend to paint is dust-free, well-ventilated, and that the ambient temperature is at least 20°C. Wash the surfaces and clean them of any impurities before you begin to paint. After cleaning, dry the surface with a cloth; avoid paper towels as they usually leave dust behind on the surface. Protect all the surfaces you do not wish to paint. Mix well before use. If the surface is already painted, paint a test area to check the suitability of the rubber paint. The rubber paint may react with surfaces treated with single-component paint. When spray-painting, several coats of paint are required to achieve a sufficiently thick layer. Always begin spraying the paint before you bring the spray over the area you wish to paint. Spray evenly and work slowly at a distance of around 15cm - 20cm from the surface. Allow each coat to dry for 10-20 minutes between painting sessions until the surface is dust-dry. Remember that the drying time for each coat will lengthen as the thickness of the layer increases. Inspect and clean the nozzle opening regularly to avoid spatter. Once you have thoroughly painted the surface, check to make sure that you have painted all of the surface. Never touch a treated surface that is either wet or not completely dry. Paint subsequent coats in different directions, perpendicular to the first coat. Remember that you can turn the red nozzle opening to adjust the nozzle and paint spray if you wish. The best result is achieved by patiently applying several coats. A sufficiently thick layer of rubber paint can be easily peeled off; this is achieved after around four coats. We recommend a coat of white paint as a base to ensure that neon colours are as bright as possible. Once the final coat has been painted and is still wet, you can remove the protective taping or any other protection in direct contact with the treated surface. All other protection should be left in place and removed only once the paint has dried, or by cutting it open with a knife once the RUBBERcomp® is completely dry. We recommend a plastic blade for cutting. Drying time: (20°C, 50% relative humidity): Dust-dry: approx. 10-20 minutes Dry to the touch: approx. 30-60 minutes Completely dry: after 4-8 hours Final hardness: approx. 2 days Drying times may be longer at cooler temperatures. Coverage: Spray approx. 0.5m2 / can (4 coats) For e.g. wheel rims (17 inch, series, 4 coats), you will need 3-4 cans. UK Seller items here in stock .. Ready to go out today