Description:
Two Available leads: 8.25 feet extendable wiring harness, two Sets of light output connectors for dual light fixtures less than 200W
Efficient protection: power relay and inline blade fuse ACT as the first Line of defense against overcurrent and short circuit
Shining in the dark: built-in two premium LEDs emit soft light to illuminate the patterns, easy for you to find the switch in the dark
Wires are wrapped in high-temp abrasion resistant nylon braided sleeving
suitable for almost all 12V battery vehicles, such as jeeps,4x4 , SxS, ATVs, UTVs, cars, trucks, Pickup, motorcycles, Van, Boat, ships, yachts and trailers
Specification:
Wiring Harness:
8.25ft Universal Wiring Harness Kit - One Lead.
1 set of light connectors to light fixtures; Operating Voltage: 12V DC.
Wire Gauge: 16 AWG; Max Wattage: 180W; Max Ampere: 15A.
on-off rocker switch; DC 12V automotive relay, inline blade fuse with three extra fuses.
Note: Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
Switch:
on-off rocker switch rated at 12V 20A and 24V 10A DC.
Material: ABS+PC; Built-in 2 LEDs, laser-etched pattern.
Product Size: 1.9"(48.3mm) x 1.04"(26.3mm).
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.
one Lead With one set of light output connectors, the wiring harness can hook up one LED light within 180W at the same time.
Connector The connector can be pulled out, easy wiring and installation. It is also convenient for you to replace the wire of switch.
Universal Fit:
Compatible with all automobiles,Boats and devices equipped with a 10-30v power source within 180W.
Package :
1 To 1 40A 12V Wiring Harness Kit/ 1Pc
Surface Finish | as photos shows |
---|---|
Brand | Unbranded |
Manufacturer Part Number | BPWK-1lead |
Manufacturer Warranty | 1years |
Length | Up to 3 metres of wiring |
Switch type | Press button on/off switch |
Lead quantity: | 1 leads for one led lights bar |
Switch relay: | 12VDC 40A switching relay |
Voltage(V) | 12v-24v Wiring Loom Harness Offroad Led Light Bar |
Core Material | Bare Stranded Copper Wire |
Power | 18W-300W |
Placement on Vehicle | Front, rear, hood, roof, bumper, windshield |
Lighting Technology | LED |
Fitment Type | Direct Replacement |
Beam Type | High Beam, Low Beam, Spot, Flood, Combo |
Type | Light Bar/fog light/rock light |
Voltage | 12V |
To Fit | Fog light/driving/reverse lamp |
Apply to 1 | Off-road vehicles, ATVs, trucks, boats, buses |
Apply to 2 | excavators, fellers, rollers, bulldozers, cranes, |
Apply to 3 | fire trucks, police cars, emergency vehicles |
Apply to 4 | communication vehicles, military command vehicles |
LifeSpan | About 50,000 hours |
Wattage | relay is rated to 40A |
Wire Gauge | 16 AWG |
Switch Relay | 12VDC 40A switching relay |
Conection | For one light bar |
Operating Voltage | 12V DC Power |
Wiring length | 10ft or 3M |
Interchange Part Number | Heavy Duty Wiring System, Switch Adapters |
Superseded Part Number | Wiring Harness Universal, Wiring Harness Kit for fog lights |