The upgraded fan effectively prevents dust deposition, larger air volume can restore fresh air quickly inside the car;
rigorous mechanical and electrical testing，balanced testing ensure the strong and long-term operation of the motor, quieter, more energy-efficient, more durable to meet the comfort level of passengers;
heater blower motor is perfectly protected by safe and reliable packaging, the foam shims are firmly sealed to the housing to reduce the entry of impurities and make the blower motor work more efficiently;
GVPART4U heater blower motor can work fine at each speed with a service life of at least 80,000 hours
Package includes 1 AC Blower Motor with Fan Cage. Do not hesitate to contact us if you have any doubts or queries.
How to Replace Blower Motor Assembly
|
|
|
|
|---|---|---|
Step 1 – Prepare the vehicle and remove blower motor assemblyStart by disconnecting the negative battery terminal, and set it aside someplace where it isn't touching metal. If applicable, remove the passenger-side floor mat. Typically there is a plastic cover underneath your glove box. Detach the cover from the bottom of the lower dash. The blower motor will be attached at the bottom of the plastic climate control unit, disconnect the wires from the blower motor. Remove the screws holding the blower motor, carefully slide the motor out of the housing. |
Step 2 – If applicable, remove the spring clip and transfer the plastic wheel to the new motorOnce the motor is removed, if you need to transfer the plastic wheel to the new motor, remove the spring clip on the end of the motor shaft. Be careful not to lose the spring clip—it's typically a part you can only get from a dealer. Gently work the plastic wheel off of the shaft. If a transfer of the blower wheel is needed, inspect it carefully for any damage. |
Step 3 – Reinstall the motor, check and reassemble the vehicleBefore continuing, now is the best time to clean the heater assembly. Use the vacuum to remove the dirt, dust, leaves, and other things that may clog it. Reinstall the motor into the climate control unit. Once it's secure, reconnect the wires. Then reconnect the negative battery terminal and start your vehicle to check the function of your new motor. Reattach the cover under the dash. Replace the floor mat. Turn on the car and the A/C. If it works, then you have successfully replaced the blower motor assembly. |
