Heat Shrink Wire Solder Seal Connectors Waterproof Butt Terminals Kit 180 Pcs
- Easily Than Old Fashioned Manual Solder Just strip wire insulator with a proper length then insert wires into the solder sleeve, twist the conductor together and move the connector to the middle of the conductor, evenly heat it by a heat gun until it melt and join
- Waterproof The plastic ends shrink with the solder going soft to leave a strong waterproof sealed join
- Unique design these solder wire connectors are equipped with solder ring, do not need to crimp, which different from old ordinary heat shrink tubing. The solder terminals are clear and can be checked accurately while the wires are stripped and inserted in
- Time Saving The waterproof wire connectors save a lot of time to tinning the cable then messing around trying to keep the heat shrink out of the way whilst melting the solder.
- Use Tips If you use flux on both sides of wire before connecting them together and sliding the tube in place, you will have a solid connection. this item fit for cable which diameter equal to or samll than 2.7mm/0.1inch
![](https://app.skufetch.com/images/templates/product/Hejo_180PCS_Solder_S_5d799f52d689791ae210425f454860cc.jpg)