🚚Please note - For man and van delivery - please message your postcode for an exact quote so we can organise delivery for you!🚚
The retro red Memphis Heat Focus Gas Patio Heater, your ultimate companion for a warm and festive outdoor Christmas. - LIMITED EDITION - VERY RARE!!
🎅 Unmatched Warmth & Style: At 2.13 meters tall, this sleek, modern heater is not just a source of warmth; it's a style statement. Perfect for those chilly December nights, keeping your outdoor celebrations merry and bright.
❄️ Powerful 13kW Heating: Get ready for instant, comforting warmth with a powerful 13kW output. It's the ideal way to make your garden the cosiest spot for Christmas gatherings.
💚 Energy-Efficient & Environmentally Friendly: Embrace the festive spirit while caring for our planet. Our heater is designed for maximum efficiency, ensuring your winter evenings are both warm and environmentally conscious.
🎁 Safe & User-Friendly: Safety comes first with our heater. Easy to use with clear instructions, it's the safest choice for your family's festive outdoor moments.
🍷 Perfect for Every Setting: Whether it's Christmas Eve or a New Year's bash, this heater spreads warmth evenly, ensuring your guests are comfortable and your evenings are unforgettable.
🌟 Limited Stock – Ideal for Christmas Gifting! Make your garden the go-to place this winter with the Memphis Heat Focus Gas Patio Heater. Grab yours now and turn your outdoor space into a cozy, enchanting Christmas haven
Technical Specifications:
Overall Height: 2.13 meters approximately.
Gas Category: I3+
Overall Width: 865 millimetres approximately.
Heat input(·Qn): 13 KW Net. ( 44356 BTU/H )
Control Valve: Combined gas valve and flame failure device.
Setting Pressure: 37mbar
Main Burner Type: Pressed steel venturi.
Injector Size: 1.82 mm
Regulator Outlet Pressure
+ Type: 37mbar (27mm clip on)
0086
Servicing Procedure:
Servicing to be carried out by qualified gas technician, every 100 hours of use.
• Remove regulator from cylinder.
• Remove reflector “Parasol” Assembly.
• Remove “Burner” for examination and cleaning.
• Vigorously wire brush mesh inside and out to remove any clogging deposits.
• Remove windshield guard to expose main burner assembly.
• Examine, clean or replace main injector, ignition electrode, thermocouple and gas pipe O ring as required. During storage, particularly, insects or foreign matter may get into gas line/nozzle. Ensure that the gas line is completely clear before use.
Note: There are a number of ways to check the gas for leaks. We recommend a leak detector spray or soapy water applied onto the joints with a small paint brush be used. Leaks can be seen as small bubbles at the outlet point. DO NOT check for leaks using a naked flame. Check the condition of the hose monthly and each time the cylinder
is changed. If the hose is in any way degraded, replace it immediately with the same specification of hose. Hose length must be 150cm.
For servicing contact your local gas supplier or phone
Calor Direct U.K. 0800 662 663. Universal Innovations Helpline 00 353 1 2873797
For further information on the heater and its parts, please contact the factory direct. Helpline Hours, 9am - 5pm Mondays to Fridays. 00 353 1 2873797.
We are located at: Universal Innovations.
Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ireland.
USER INSTRUCTIONS
Read the instructions before installation & use. The appliance must be installed and the gas cylinder stored in accordance with the regulations which are currently in force. The patio heater should be positioned on a level surface.
For use outdoors or in amply ventilated areas. An amply ventilated area must have a minimum of 25% of surface area open. The surface area is defined as the the sum of the walls surface (see Fig. 1).
To fit a Propane Gas Cylinder:
Change the gas cylinder in an amply ventilated area away from any ignition source (candles, cigarettes or any other flame producing applainces). Ensure that the area is free from any unprotected combustible material or substance.
1. Lift “Gas Cylinder Chamber” to access hose and regulator.
2. Attach the regulator to the new cylinder and check regulator seal is correctly fitted (see instructions with regulator.)
3. Sit cylinder into the cylinder housing, ensuring that the hose is not twisted or damaged in any way.
4. Use gas cylinders with a gas capacity of 10 - 13kgs.
Lighting instructions:
1. Turn on gas supply at cylinder.
2. Push dial in and turn to position .
3. While dial is held pressed in at position , press spark button repeatedly to ignite the burner.
4. Hold dial in for at least 10 seconds to ensure burner stays lit. If the burner is not lighting, repeat steps as above, and hold dial in for 20 seconds. Do not continuously hold dial in as you may cause a build up of gas.
(IF FITTING A NEW GAS CYLINDER,YOU MAY NEED TO HOLD THE DIAL IN FOR AS LONG AS A MINUTE TO ALLOW ALL THE AIR TO BE EXPELLED FROM THE GAS LINE.)
5. In windy conditions, shield from wind to ensure easy lighting.
6. Turn dial to one of the higher flame positions as required.
To Turn Off:
1. Turn dial to postition .
2. Push in and turn to position .
3. Turn off gas supply at gas cylinder.
In the event of a gas leak turn off the gas supply at the gas cylinder, and contact a competent gas technician immediately.
Cleaning: Abrasive cleaners are NOT to be used. Clean unit with a damp cloth when fully cooled.
Winter Storage: Remove cylinder from unit. For ease of storage we advise that the parasol be removed. This can easily be done by removing the 3 bolts, and lifting the parasol off. Be sure that the heater is fully cooled before proceeding with this operation.
DO NOT: Attempt to use the heater indoors. This product is only for use in outdoor and well ventilated areas and is only to be used for space heating. Do not use below ground level.
DO NOT: Move the appliance when in operation.
DO NOT: Use any other gas except Propane (G31). This unit was designed for propane use only.
DO NOT: Attempt to clean the heater until it is turned off and fully cooled.
DO NOT: Use a naked flame to detect suspected gas leaks.
DO NOT: Allow children or pets to play near the heater.
DO NOT: Use conventional awnings, tents or gazebos over Patio Heaters. Use only purpose made gazebos, designed for such a purpose.
DO NOT: Leave this product unattended when in use.
DO NOT: Use an adjustable regulator with this appliance.
WARNING!
Never attempt to light unit if the hose is loose or damaged in any way. Also never attempt to light the unit if you have reason to believe that the unit may be leaking gas. Have the unit fully checked by a competent person, in accordance with the instructions enclosed. We recommend a frequency of servicing every 100 hours of use.
DO: Place heater on a flat, level and solid surface at all times.
DO: Wait for 3 minutes before relighting, if the burner flame becomes extinguished during use.
DO: Ensure that all naked flames are extinguished before fitting a new cylinder.
DO: Store gas cylinders outdoor, above ground level and in a safe and secure environment.
DO: Make sure that the gas supply at the gas cylinder is turned off after use.
DO: Ensure that servicing of the unit is carried out by a competent person in accordance with the instructions enclosed.
DO: Use only the type of gas and the type of cylinder specificed by the manufacturer.
DO: Shut off the valve at the cylinder or the regulator before moving the appliance.
NOTE: It is normal for the Patio Heater to produce smoke during its first three minutes of use.
This is caused because it burns off the protective oil film on the metal surface.
ALWAYS: Follow any safety instructions supplied with gas cylinders.
ALWAYS: Keep unit well away from glass doors and windows to ensure no possibility of heat build up and damage.
ALWAYS: Avoid leaving the heater exposed to extreme wind conditions as it might blow over and damage the unit and other items.
ALWAYS: Ensure a minimum clearance above and beside of 0.6M from non protected combustable materials both vertically and horizontally. See fig 2.
•The use of this appliance in an enclosed area can be dangerous and is prohibited.
•Gas category I3P
•The appliance must be installed and the gas cylinder stored in accordance with instructions and local regulations.
•Do not obstruct the ventilation holes of the cylinder housing.
•The flexible hose must be changed within the prescribed intervals.
•In case of violent wind particular attention must be taken against the tilting of the appliance.
•Keep the instructions for future reference.
•In the event of gas leakage turn off the appliance at the gas supply and contact our helpline for assistance. TEL: 00 353 1 2873797
TECHNICAL & SERVICING INFORMATION
This appliance is designed for external use only using Propane (G31) gas at a supply pressure of 37 millibar and must be serviced by a competent person in accordance with the instructions included. Please read all accompanying documentation carefully.