Torque Converter Comet Clutch Go Kart Clutch 1 Inch Replaces Comet TAV2 Manco 10T 40 or 41 and 12T 35 Chain Drive Belt (1" 10T 40/41 and 12T 35 Chain)
Description
Product Dimensions | 13.78 x 7.87 x 7.48 inches |
Manufacturer Part Number | MS-G56130 |
Item Weight | 12.1 pounds |
Size | 1" 10T 40/41 and 12T 35 Chain |
- Go Kart Torque Converter Kit is a direct and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
- Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 1"(24.5mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
Product Description
212CC GO KART TORQUE CONVERTER KIT
This is a quality after market reproduction of the Comet made TAV2 Torque converter kit. Designed to be used on go-karts, mini-bikes and wake wrenches with engine sizes 2hp to 8hp.
This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands.
For your convenience this kit comes with both sprockets, a 12 tooth sprocket for #35 chain and the 10 tooth sprocket for #41/40/420 chain.
Fully Compatible with Comet and TAV2 torque converters, widely used in lawn equipment, small tractors, karts, miniature bicycles, miniature choppers, all-terrain cars, motorcycles,water skies,CVT gearboxes for karts, small vehicles, small, golf karts, odyssey, snowmobiles, ATVs, industrial, winches and etc. system.
Important parts have been assembled!
Specifications:
Material: Iron & Aluminum
Drive clutch bore: 1"(25.4mm)
Driven unit: Diameter 6" (5/8" driven pulley)
Sprocket teeth: 10 tooth for #40/41/420 chain and 12 tooth for #35 chain
Engagement range: 2350±200 RPM
Recommended engine: 2HP-8HP
Belt: Asymmetrical type
Fits: All engines with a 1 inch straight crankshaft
You will Get:
- 1 x Drive Belt
- 1 x Plastic Cover
- 1 x 1" Driver Pulley
- 1 x 5/8" Driven Pulley (6" Diameter)
- 1 x Aluminum Mounting Plate
- 1 x 10 Tooth Sprocket for #40 #41 Chain
- 1 x 12 Tooth Sprocket for #35 Chain
- 1 x Mounting Hardware Kit
Replaces OEM Part Numbers
| IMPORTANT
| NOTE
|
Off-road karts work best with two wheel drive. In sand or loose dirt, where a single wheel would often spin out, a live axle has both wheels turning at the same time, giving you twice the traction. Having a torque converter is ideal for climbing hills and inclines. | Torque Converters - Advantages Compared to a centrifugal clutch, torque converters offer better acceleration from a stand still. They also allow karts to be geared for a higher top speed. | A torque converter is a simple automatic transmission that has a low and high gear. They are commonly found on go karts, ATV's, mini-bikes, and snowmobiles. The low gear is ideal for when you're going up hills or driving slowly, and the high gear lets you achieve top speed. They are also a good choice for stop and go riding. |
How to install a torque converter?
- Step 1: Componets in kit are layed out in front of machine.
- Step 2: Remove old clutch kits
- Step 3: Bolt bracket to the four standard tapped holes in the engine crankcase using four M8*25 screws. Bracket may be rotated up or dow if necessary.
- Step 4: Break chain at proper length to go around sprocket on T.A.V. and final drive sprocket. Join chain by the master link. Move the engine forward or backward for correct tension.
- Step 5: Place the spacer (provided with kit) on the crankshaft, to bring the driver clutch in line with the driven unit.
- Step 6: Separate driver, place flat sided sheave on crankshaft. Slip belt over driven unit and over post of driver unit. Install 4 splined hub "D" outboard. (IMPORTANT: Be sure bronze idler bushing is in place on TAV 30-75. TAV 30-100 does not require bronze idler bushing.)
- Step 7: Place other half of drive on crankshaft. Line up outer cover on the "D" part of the hub, and install retaining bolt and washer.
Type | Troque Converter | Troque Converter | Troque Converter | Centrifugal Clutch | Centrifugal Clutch |
---|---|---|---|---|---|
Drive Clutch Bore | 3/4"(19MM) | 3/4"(19MM) | 3/4"(19MM) | N/A | N/A |
Driven Unit | Diameter 6" (5/8" Driven Pulley) | Diameter 6" (5/8" Driven Pulley) | Diameter 6" (5/8" Driven Pulley) | N/A | N/A |
procket teeth | 10 Tooth for #40/41Chain | 12 Tooth for #35 Chain | 10 Tooth for #40/41Chain and 12 Tooth for #35 Chain | 10 Tooth for #40/41Chain | 12 Tooth for #35 Chain |
Engagement range | 2350±200 RPM | 2350±200 RPM | 2350±200 RPM | 2300±300 RPM | 2300±300 RPM |
Recommended engine | 2HP-8HP | 2HP-8HP | 2HP-8HP | 2HP-7HP | 2HP-7HP |
Belt | Asymmetrical Type | Asymmetrical Type | Asymmetrical Type | N/A | N/A |
ABOUT US
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.
For shipping outside of the continental USA, we only use eBay's Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out in order to calculate costs for shipping the item to your country. Messages regarding eBay's Global Shipping Program MUST be directed at eBay EXCLUSIVELY.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.