Reversing Camera Input
This car stereo system supports video input, can be connected with rear camera. It automatically changes to reversing view while backing & parking your car.
Include a backup camera,12 LEDs and IP68 waterproof.
Easy operation and wiring, easy operation and help driver a safe and easier parking.

Camera Wiring:

Power cable: black wire connect to negative battery, red wire connect to the positive battery.
Reverse trigger wire (pink wire) labeled "reverse or back in" connect to car's reverse light positive.
Camera video signal input plug to port on the back of car radio: CAMIN

FAQs:
1.why won't the car radio turn on?
1.1Please check the car radio voltage: 12V
1.2When you test this car radio, the yellow, red and black 3 lines are only connected to 2, so it can not turn on, the yellow line to the positive red line to the key control line, the black to the negative, less connected or connected to the wrong one, does not turn on.
1.3Replace the same type of insurance to test the car radio.
Note: Please must use our power cable to connect our car radio, it is not possible to insert the original car plug into our machine directly.

2.Why can't search FM?
2.1: No radio antenna is connected;
2.2: Please check whether the radio antenna is plugged in. Please plug multiple antennas multiple times to achieve good contact;
2.3: The signal at your location is not good. Please go to a better place to test again.
2.4: The radio antenna on the car is broken/no effect; please replace the radio antenna and test again.

3.Why can't the car radio connect via Bluetooth?
3.1.Open the phone settings, open Bluetooth in the Bluetooth function, search for Bluetooth devices, find the Bluetooth model of the player to pair；.
3.2.Try to use another mobile phone to test this function.
If all methods are correct and you still can't use Bluetooth, please unplug the plug on the back of the player and plug it in again after 3 minutes.

4. Why is there noise?
The noise is generally caused by two reasons.
1, the original speaker power is too small, when the power is turned up there is noise, the solution: replace the speaker or listen to the song, the volume is not too big;
2, the speaker line hitch, the solution: hitch to mourn the speaker line, can be directly to the machine of the speaker line;

5. Settings cannot be saved (that is, no memory)?
That means no save function; there are two reasons: 1: the yellow line and red line get together (separate connection yellow connect positive, red connect key control) 2: the yellow line and red line is connected to the reverse (swap the position on the good).