| |
| |
CONDITION: NEW
WARRANTY: Full Manufacturer's Warranty (Panasonic)
Omega Part # PAN-PTRZ21KU-90
Identifier: DS
Product Highlights:
- Laser 3-chip DLP, 21,000 lumens (center), WUXGA
- Lamp-free laser projection with dust resistant liquid cooling system for 20,000 hours maintenance free operation
- Real maintenance-free projection with filter-less design and no need for smoke-filter
- Un-interrupted projection with dual-light source and built in redundancy inputs
- Geometric Manager Pro, color matching and edge blending
OVERVIEW:
Laser 3-chip DLP, 21,000 lumens (center), WUXGA resolution, Geometric Manager Pro, color matching and edge blending work together providing stunning image quality in a compact body designed for large venue applications.
Tech Specs:
| Technology |
Laser 3-chip DLP |
| Power supply |
AC 200V-240V, 7.7A, 50/60Hz
The light output will decrease to approximately 1/2 when using the projector with
AC 100V to AC 120V [9.6A]. |
| Power consumption |
1,510 W (1,525 VA [AC200V]) (0.3 W with Standby Mode set to Eco*1,
4 W with Standby Mode set to Normal)
1,217W (Normal Mode), 972 W (Eco Mode)
Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft),
IEC627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [2] |
| BTU value |
Max 5,159 BTU |
| DLP™ chip | Panel size |
24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) |
| DLP™ chip | Display method |
DLP™ chip x 3, DLP™ projection system |
| DLP™ chip | Pixels |
6,912,000 (1920 x 1200 x 3) pixels |
| Refresh Rate |
120 Hz*2 |
| LENS |
Optional (no lens included with this model), powered zoom, powered focus lens |
| Light source |
Laser Diode (Laser class: Class 1)*Class 3R for North America. |
| Illumination life of set |
Varies depending on operation mode setting.
20,000 hours at half luminance (Normal) 24,000 hours at half luminance (Eco)
* IEC62087: 2008 Broadcast contents, Dynamic contrast [3]
(NORMAL/ECO Temperature: 30°C (86°F), Altitude 700m (2,297 ft),Dynamic
Contrast [3] Under conditions of 0.15 mg/m3 of particulate matter |
| Screen Size (Diagonal) |
1.78-25.4 m (70-1,000 in) with 16:10 aspect ratio
1.78-15.24 m (70-600 in) with the ET-D75LE8, 16:10 aspect ratio
3.05-15.24 m (120-600 in) with the ET-D75LE95, 16:10 aspect ratio |
| Brightness |
21,000 lm (Center)*3*5 / 20,000 lm (Normal)*4*5 |
| Center-to-corner uniformity |
90% |
| Contrast*3 |
20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
| Resolution |
WUXGA (1920 x 1200 pixels) |
| Scanning frequency | Video/Y/C |
fH:15.73KHz fV:59.94Hz, fH:15.63KHz fV:50Hz |
| Scanning frequency | RGB |
・Resolution: 640 x 400 pixels to 1920 x 1200 pixels
・Dot clock frequency: 162MHz or less
・PIAS (Panasonic Intelligent Auto Scanning) |
| Scanning frequency | YPBPR(YCBCR) |
・Resolution: 480i/576i to 1920 x 1080 pixels
・Dot clock frequency: 148.5MHz or less
・The SYNC/HD and VD terminals do not support 3 value SYNC. |
| Scanning frequency | DVI |
・Moving image signal resolution: 480i*6/576i*6 to 1920x1080
・Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
・Dot clock frequency: 25 MHz to 162 MHz |
| Scanning frequency | HDMI/DIGITAL LINK |
・Moving image signal resolution: 480i*6/576i*6 to 1920x1080
Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
・Dot clock frequency: 25 MHz to 162 MHz |
| Scanning frequency | SDI |
SD-SDI signal
HD-SDI signal
3G-SDI signal |
| Optical axis shift |
Vertical (from center of screen) ±55 % (±44 % with ET-D75LE6, +68 % - +78 % with ET-D75LE95) (powered)
Horizontal (from center of screen) ±20 % (±15 % with ET-D75LE6, ±12 % with ET-D75LE95) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. |
| Installation |
Ceiling/floor, front /rear, free 360-degree installation |
| Terminals | RGB 1 IN |
BNC x 5 |
| Terminals | RGB 1 IN | R, G, B |
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
| Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) |
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals | RGB 1 IN | Y/C |
Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms |
| Terminals | RGB 1 IN | Video in |
BNC x 1, 1.0 Vp-p, 75 ohms |
| Terminals | RGB 2 IN |
D-sub HD 15-pin (female) x 1 |
| Terminals | RGB 2 IN | R, G, B |
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
| Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) |
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals | DVI-D IN |
DVI-D 24-pin x1
Single link, DVI 1.0 compliant, HDCP compatible |
| Terminals | HDMI IN |
HDMI 19-pin x1
HDCP compatible, Deep Color compatible |
| Terminals | SDI IN 1 |
BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (LINK A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425-3 compliant |
| Terminals | SDI IN 2 |
BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (LINK B) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 2) signal SMPTE ST 425-3 compliant |
| Terminals | DIGITAL LINK |
RJ-45
HDBaseT™ compliant, HDCP compatible, Deep Color compatible |
| Terminals | 3D Sync 1 In/Out / Multi Projector Sync In |
BNC x 1, IN : TTL Hi-z OUT : TTL max10mA |
| Terminals | 3D Sync 2 Out/Multi Projector Sync Out |
BNC x 1, TTL max10mA |
| Terminals | SERIAL IN |
D-sub 9-pin x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL OUT |
D-sub 9-pin x 1 for link control |
| Terminals | Remoter 1 In |
M3 jack x 1 for wired remote control |
| Terminals | Remoter 1 Out |
M3 jack x 1 for link control |
| Terminals | Remoter 2 In |
D-sub 9-pin x 1 for external control (parallel) |
| Terminals | DIGITAL LINK/LAN |
RJ-45 x 1 for network connection, 100Base-TX
PJLink™ (class 2) compatible, Art-Net compatible |
| Terminals | DC OUT 5V |
USB connector (type A) x 2 for power supply only (DC 5V, Max 2A) |
| Power cord length |
3.0 m(9 ft 10 in) |
| Cabinet materials |
Molded plastic |
| Dimensions (W x H x D) |
598 x 270 x 725 mm (23 17/32inch x 10 5/8inch x 28 17/32inch ) (not including protruding parts) |
| Weight |
*9 Approximately 49kg (108 lbs) (not including lens) |
| Operation noise |
*3 46dB |
| Operating environment |
Operating temperature: 0-50 °C (32-122 °F)*10; Operating humidity: 10-80 % (no condensation) |
| Note |
*1 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain c ommands can be received for external control using the serial terminal.
*2 Refresh rate varies depending on scanning frequency.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 The value of the light output at the center region of the projected image is extracted based on the light output measurement method de・ed by the ISO/IEC 21118:2012 international standards.
*5 In AC200V, When using a projection lens other than ET-D75LE95.
*6 Pixel-Repetition signal(dot clock frequency 27.0MHz) only
*7 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from t he screen.
*8 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55 °.
*9 Average value. May differ depending on the actual unit
*10 Operating temperature is 0–45 °C (32–113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level.
When the [PROJECTOR SETUP] menu -> [OPERATION SETTING] -> [OPERATING MODE] is set to [NORMAL], and the operating environmen temperature exceeds the following value, the light output may be reduced to protect the projector.
•When using the projector at an altitude lower than 2,700m (8,858') above sea level: 35°C (95°F)
•When using the projector at an altitude between 2,700m (8,858') and 4,200m (13,780') above sea level: 25°C (77°F) |
What's included:
- Panasonic PT-RZ21K DLP Large Venue Projector (NO LENS)
- Remote Control
- Limited 3-Year Manufacturer Warranty (3 Years or 20,000 Hours (Whichever Comes First)
|
|
*Extended Warranty Options Available that cover everything including wear and tear, accidental damage, and more (Excludes fire, loss & theft).
Shipping:
Omega Broadcast & Cinema (OBC) ships within the United States, Canada, Mexico, UK, Korea, Japan, Australia via a carrier that is 100% trackable and with the ability to require a signature. Insurance is required on all shipments for your protection. Buyer is responsible for any customs, fees, duties, and taxes incurred for out of country shipments.
Order Processing:
All orders placed after 3pm CST will be processed the next business day.
Need your order sooner? Please contact us for availability.
Return Policy:
If returned within 30 days restocking fees will be charged according to Ebay’s Return Policies and Buyer/Seller Protection policies. No Returns Accepted after 30 days. Brand New items must be unopened, unused, include all original packaging, and in the exact same condition (seal unbroken, no scratches, blemishes, etc.). Open Boxed items will be accepted at our discretion and must meet the same requirements as Brand New items. Product must not be registered, UPC intact and the warranty card left blank. DEMO, BSTOCK, and USED items will follow the same guidelines. Hour meters must have no more than 2 additional hours than when it shipped. Only items that are Dead On Arrival, or items that are approved by Omega Broadcast & Cinema may be exchanged for an item of equal or greater value will have the restocking fee waived. Omega Broadcast & Cinema reserves the right to use its own discretion for acceptance and exceptions. Please call before purchasing, if you have any questions.
Pictures:
Stock photos are used for all new & BSTOCK items. Pictures may show optional accessories that are not included. Please read auction description for complete list of what is included in box.
Used products will be of the actual item being auctioned.
Stock:
Equipment in auctions is subject to prior sale. Items sold by other means may have a short delay before the auction is ended. To confirm and reserve an item in stock, please contact us.
Sales Terms:
Equipment in auctions is subject to prior sale. Items sold by other means may have a short delay before the auction is ended. To confirm and reserve an item in stock, please contact us.
Accepted Payment Methods:
Payment must be by Certified Funds: PAYPAL from Confirmed addresses only. Non-confirmed addresses will only be allowed if paid by cash. All international orders must be paid by cash (OBC reserves the right to make exceptions).
LEARN WHAT OMEGA CAN DO FOR YOU
Austin-based Omega Broadcast & Cinema sells and rents professional video gear around the world, offering the latest technologies and the most trusted brands, including Sony, Panasonic & RED Camera. Omega Broadcast & Cinema is ranked first in Texas in film and video support companies and is certified by the State of Texas as a Women-Owned HUB.
Authorized Dealer for:
**Omega represents many manufacturers. Looking for a brand you don't see here? Contact us for more information!**
FINANCING OPTIONS AVAILABLE:
|
WHY CHOOSE OMEGA FINANCE?
- 100% Financing Available
- Same day approval decisions
- Finance up to $150,000 with application only*
- Expedited processing of your Omega Broadcast & Cinema orders
- Personal financial specialist will work directly with you
- A one stop shop for all your production equipment solutions
- Process manufacturers 0% financing specials with no additional overhead
*More than $150,000 may require additional documentation
BENEFITS OF FINANCING INCLUDE:
- Improved cash flow management
- Conserve Working Capital
- Bank lines are preserved
- No exposure to personal credit
- An additional credit reference and source is established
- Flexibility
- Budget Friendly
- Low fixed monthly payments
- 12-60 month terms available
- No payments for 90 days available
- Zero down at signing available
Financing allows you to conserve working capital while also providing a fixed and forecasted technology spend. The Omega Broadcast & Cinema Finance program allows businesses to finance the acquisition of production solutions, software, and services. This provides our customers a convenient, single source for a complete production financing solution.
|
#SONY #PANASONIC #BROADCAST #RED #CAMERA #AUSTIN #TEXAS #ARRI #FS7 #FS5 #WEAPON #RAVEN #SCARLET-W #VARICAMLT #VARICAM #BLACKMAGIC #AUDIO-TECHNICA #CHRISTIE #BARCO #RIEDEL #FUJINON #ZEISS
|
|
