Prodcuct Details:
Vehicle Bolt Pattern: 5x114.3mm or 5x4.5"
Wheel Bolt Pattern: 5x114.3mm or 5x4.5"
Hub Centre Bore: 64.1mm
Thickness: 20mm
Thread Pitch: M12x1.5
Color: Black
Fitment:
For acura
2016-2020 CDX
2001-2003 CL
2005-2011 CSX
2012-2020 ILX
1997-2001 Integra Type-R
2001-2006 MDX
2014-2016 MDX
2006-2020 RDX
1995-2004 RL
2002-2006 RSX
1999-2008 TL
2014-2020 TLX
2003-2014 TSX
1993-1995 Vigor
For honda
1998-2002 Accord(V6 Engine / 5-Lug Only)
2003-2020 Accord
1999-2020 Avancier
2016-2020 BR-V
2006-2020 Civic
1995-2020 CR-V
2010-2017 CR-Z
2013 2015-2020 Crider
2007-2010 Crossroad
2011-2016 Crosstour
2004-2009 Edix
2003-2011 Element
2004-2020 Elysion
2010-2016 FCX Clarity
2004-2009 FR-V
2017-2020 Freed
1998-2020 HR-V
1999-2012 Inspire
2018-2020 Inspire
1997-2006 Integra
2013-2020 Jade
1999-2004 Lagreat
1996-2004 Legend
2003-2006 MDX
1995-2004 Odyssey
2003-2008 Pilot
1997-2001 Prelude
1994-2004 Shuttle
1996-2020 Stepwgn
2000-2014 Stream
2013-2020 Vezel
2014-2020 XR-V
Package include:
4Pcs Wheel Spacers Adapters
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and For flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Important Notes:
Please make sure that these are the correct application for your vehicle. And confirm the PCD parameters of wheel spacers are consistent with the item parameters.We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
Installation by a trained professional is highly recommended.
Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above.
Some vehicles may require modifications to make this type of adapter work properly.
Be aware that the studs on the vehicle cannot stick out past the face of the back adapter plate, you may need to modify them by grinding/cutting/trimming.
We make no promise or guarantee that this item is compatible with your vehicle and/or wheels.
Vehicle compatibility, if listed, is used to match the vehicle bolt pattern with the adapter only.
The adapters must be installed correctly, Lug Nut Guys or the manufacturer cannot be held responsible for improper installation causing failure.
Please ask if you have any questions, we're here to help!