Description:
l For a two-way ESC with brake, the handle is up and the motor is rotating forward. When the car wants to brake, turn the handle to the reverse position. At this time, the motor does not move and is in the braking state. If you want to go forward or backward, return the handle to the center, and then operate forward or backward
l Connect the power supply and the motor. After the receiver is plugged in, there will be a sound of DO. At this time, the ESC is powered on normally.
l If it is in the center position, the motor will send DO BE MI immediately. If it is not in the center position, the motor will send out DO .DO .... sound to remind the user, until the user adjusts to the center position, the DO sound stops and immediately sends out DO BE MI. After the center position study is completed, it can work normally.
l LED status: when the remote control is in the center position, the LED is half on or off, when forward or backward, the LED is fully on, and the LED flashes when there is no signal
Specification:
l Types: 180 Motor, 20A ESC, 180 Motor + 20A ESC (Optional)
l Application: for RC Car, RC Boat
180 Motor:
l Type: Miniature carbon brush motor
l Features: high speed, high torque
l Body size: 32*20.3*15.4 mm (length*width*thickness)
l Shaft length: 8.6mm
l Shaft diameter: 2mm
l Weight: 34g
l Voltage range: DC 3-7.2V
l Voltage: DC 3.7V
l No-load current: 0.65A
l Stall current: 3A
l No-load speed: 14300rpm
l Voltage: DC 6V
l No-load current: 0.8A
l Stall current: 3A
l No-load speed: 24000rpm
20A ESC:
l Working voltage: 3.0V-9.4V
l Input signal type: PPM
l Driving frequency: 2KHz
l Output current: continuous: 20A, 30 seconds 25A. 5 seconds 50A instantaneous current 80A
l Weight: 11g (with cord and plug)
l Size: 30*23*5MM (length*width*thickness)
l Wires on JST, red is positive, black is negative
l 1*3P cable black (negative), red wire (positive). White wire (signal wire)
Package: (Optional)
l 1x 180 Motor
Or
l 1x 20A ESC
Or
l 1x 180 Motor +20A ESC
