Hydrogen Generator - instant on demand - HHO 600 - Oxyhydrogen Welding portable 220/110 copper, gold, silver
SUPER HOT FLAME
Condition:
New – Open box:
Seller Notes:
“Open box condition - tested works extremely well.
Comes with 2 welding tips, light use hose, spark arrester, manual and extra catalyst. So hot it will cut through steel nails and screws. Ideal for welding gold, copper pipes. Portable, mounted on wheels.
Produce your own Hydrogen with electricity from wind and / or solar power. It is amazing what can be done with this unit.
CATEGORY AND TAGS:HHO Welder Machine hho hydrogen welder, oxy hydrogen welding machine, oxygen hydrogen welding machine
■ 220V/110V 50/60Hz
■ 600L/h gas output
■ Power consumption 2KW
■ Can be used for brass instrument soldering, copper magnet wire welding
■ Industrial equipment
■ Can keep working for 24 hours”
Product Feature
1. Easy to use. The machine produces Hydrogen & Oxygen gas on demand. When the machine is power on, you can use it after 10 seconds. The gas output is adjustable as you need.
2. 100% safety. There is no gas cylinder and no gas stored. The maximum pressure is 0.2 Mpa.What’s more,the machine have multiple protection system like built-in anti-backfire protection, leakage protection, over pressure protection, over temperature protection, water shortage protection.
3. Environmental friendly. It uses water as fuel source and produces only water vapor after combustion. There is no harmful emission such as hydrocarbons, carbon monoxide, or carbon dioxide.
4. High efficiency. The flame temperature is over 2800 degrees Celsius. The flame is concentrated so it can melt fast refractory metal or non metal materials.
5. Cost economy . It consumes only pure water and electricity. It is economical and practical when compared to the LPG, Propane, or acetylene.
CATEGORY AND TAGS:
HHO Welder Machine hho hydrogen welder, oxy hydrogen welding machine, oxygen hydrogen welding machine
■ 220V/110V 50/60Hz
■ 600L/h gas output
■ Power consumption 2KW
■ Can be used for brass insrument soldering, copper magnet wire welding
■ Industrial equipment
■ Can keep working for 24 hours
Comparison
Comparison between oxyhydrogen welding and Oxyacetylene welding
Comparison Oxyhydrogen welding Oxyacetylene welding
Working features
Only water and electricity to produce oxyhydrogen gas on demand
Oxyacetylene welding is high pressure oxygen cylinder and acetylene cylinder
Welding quality
1. High temperature, flame temperature can be 2800 Celsius
2. Flame concentration, no flame spread
3. The solder joints are smooth and full
1. Low flame temperature, easy to cause virtual welding and dissoldering ,this will affects the product quality.
2. Flame spread, easy to cause the adjacent varnished wire depainting and lead to poor insulation
Working efficiency
1. Quick welding speed, high temperature will increase the welding efficiency
2. High energy, hydrogen heat value is 34000 kilocalorie,
3. No need to remove the varnish 1. Low flame temperature, low relative welding efficiency
2. Gas cylinder need keep in storage and carry, cost labor-hour.
3. If the gas company doesn't send gas in time, it will seriously affect the production
4. Need to remove the varnish, will cost more time
Safety
1. No gas cylinders
2. No leakage and explosion
3. No poison
4. No high pressure
5. No thermal radiation.
6. Built-in anti-fire protecting device
7. No gas cylinders, with a risk of leakage and explosion
8. No gas leak will lead to poisoning or death
Cost
1. Water cost is low, only some electricity and no fuel cost (low cost catalyst required - )
2. energy saving 40%-60%
Acetylene cost is high per cbm, so more fuel gas cost and high welding cost
Health and environment
1. Zero carbon emissions processes.
2. Water as a source for welding and only water vapor after combustion.
3. Non-toxic to the workers and eco-friendly to the environment.
1. Oxyacetylene combustion produces toxic gases such as carbon monoxide, carbon dioxide and sulfur dioxide.
2. Harmful to the workers and not friendly to the environment.