Features:
Constant temperature bibcock also calls constant temperature flower to asperse to mix faucet, its action is to mix cold water and hot water to become the temperature that sets beforehand automatically, maintain the temperature that sets constant and changeless (mark on bibcock temperature number, can rotate through temperature-controlled hand-wheel arbitrarily adjust temperature).Every time a bath, as long as a tap, the outflow of water is the last set the temperature
Safety: When the cold water is out of supply, the flow rate of mixed effluent decreases rapidly to close and the mixed effluent is mixed. The temperature is reduced to the safe and non iron temperature
Sensitivity of temperature auto-adjusting: When the inlet temperature of cold practice is unchanged, the pressure changes by 20% respectively. The effluent temperature change is less than 1.5 degrees Celsius. When the cold and hot water pressure is constant, the hot water temperature is between 50℃-90℃. The cold water temperature changes at5℃－30℃ and the effluent temperature changes below 1.5℃．
Note:
1. Do not turn on the water supply switch when the thermostatic valve is used when the solar water tank has enough hot water. As long as the solar water tank needs water, it can be unscrewed. This is only applicable to thermostatic valves with water
2. Temperature control handle, clockwise rotation can reduce the temperature, counterclockwise
rotation can be make the temperature rise, when the temperature shown on the handle deviates from the outlet temperature, it is because of the factory. During the inspection, the water supply regulation is Inconsistent with the users actual use conditions.
3. The thermostat handle is equipped with a red safety button. When your water temperature is above 38℃．You must press the safety button to adjust it. This will remind you to pay attention when using high temperature.
4. When using the thermostatic valve in winter, the indoor temperature is below 0 C. Please close the end inlet valve connected with the cold water inlet after use. At the same time. The residual water in the valve body is discharged through the anti-freeze wire to avoid the valve body frost damage.
5. After pressing the safety button, do not quickly turn the thermostat handle, otherwise the temperature will rise sharply or drop causing discomfort
Specifications:
Type: full copper thermostatic faucet intelligent mixing water valve with concealed installation
Quantity: 1pc
Material: Copper
Color: As shown
ideal working pressure: 0.1-0.5MPA, more than 0.5MPA to install pressure reducing valve,
cold water supply temperature：5℃－30℃；
hot water supply temperature：50℃－90℃
The water temperature regulation range is 20℃-50℃
set a safe temperature of 38℃
All-copper joint size: 4.4*2.4*2.1cm (L*big hole diameter* small hole diameter)
Cover size: 6.2*1.5cm
Faucet hole size: 2*1.4cm (Outer diameter*inner diameter)
Size: 27.6*6.3*4.8cm
Net weight: 1190g
Package:
1x thermostatic faucet
2x all-copper joint
2 x the gasket
2x stainless steel cover
1x English manual
1x Package box
Import duties, value added taxes and any other charges are not included, Buyers are responsible for import duties, custom fees and taxes, if any.
Please check with your country's custom office to determine the additional costs impose on the item prior to buying.
We are absolutely NOT responsible for any import tax or Customs duty.
2. Post to NSW, VIC, QLD 4-7 business days;(Sat & Sun not included.)
Post to SA, WA, TAS 5-10 business days.(Sat & Sun not included.)
Post to NT, WA 7-12 business days.(Sat & Sun not included.)
You need to exchange for a different item.
You simply don't like your item.
The wrong item was sent.
The order was faulty or damaged.
In the result of you wanting to return an item, you have 30 days to do so, in your return please include reason and action you would like to be taken. The buyer is responsible for the return postage, and if an exchange is required then extra postage cost will need to be paid.
In the rare case of a faulty item or wrong item received then please get in contact with our customer service team and we will get the problem resolved as quickly as we can.